1.1 本规范涵盖了冰球守门员喉咙保护器的性能要求和测试方法。 1.2 本规范的目的是在不影响游戏形式或吸引力的情况下，减少喉咙受伤的风险。为此，应使用保护器: 1.2.1 按照游戏规则的意图，以及 1.2.2 按照制造商的说明。 1.3 冰球是一项具有内在危险的运动，与比赛的正常进行有关。参加冰球意味着接受一些受伤的风险。使用经本规范认证的护喉器并不能防止所有伤害。 1.4 本规范是在仔细考虑了冰球比赛规则中可能发生的喉咙损伤的频率和机制后制定的。 1.5 在适当的情况下，给出了以下各项的要求和相应的测试方法: 1.5.1 建设 1.5.2 抗冲击性， 1.5.3 新闻报道 1.5.4 标记和信息。 1.6 喉咙保护是为守门员准备的。 1.7 在意义允许的情况下，使用单数并不排除复数（反之亦然）。 1.8 尽管本规范的预期主要应用在本范围内，但请注意，本规范的用户仍有责任判断其是否适合其特定用途。 1.9 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.10 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.11 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers performance requirements and test methods for throat protectors marketed, sold, and intended for ice hockey goalkeepers. 1.2 The intent of this specification is to reduce the risk of injury to the throat without compromising the form or appeal of the game. To do so, the protector shall be used: 1.2.1 As intended within the rules of the game and 1.2.2 In accordance with the manufacturer’s instructions. 1.3 Ice hockey is a sport with intrinsic hazards associated with the normal conduct of the game. Participation in ice hockey implies the acceptance of some risk of injury. Use of a throat protector certified to this specification will not prevent all injuries. 1.4 This specification has been prepared after careful consideration of the frequency and mechanisms associated with throat injuries that can potentially occur within the rules of the game of ice hockey. 1.5 Requirements and the corresponding test methods, where appropriate, are given for the following: 1.5.1 Construction, 1.5.2 Puck impact resistance, 1.5.3 Coverage, 1.5.4 Marking and information. 1.6 Throat protection is intended for use by goalkeepers. 1.7 Use of the singular does not exclude the plural (and vice versa) when the sense allows. 1.8 Although the intended primary application of this specification is stated in this scope, note that it remains the responsibility of the users of this specification to judge its suitability for their particular purpose. 1.9 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.11 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.