IEC 61587-5:2013规定了IEC 60297和IEC 60917系列中定义的底盘、机架和插件的抗震试验要求。根据IEC 60297和IEC 60917系列，其全部或部分适用于电子设备机箱、机架和插件的机械结构，不适用于机械结构内的电子元件、设备或系统。本标准的目的是根据IEC 60297和IEC 60917系列确定机箱、机架和插件的物理完整性水平，该标准可提供一定程度的生存能力，从而在地震发生期间和之后保持功能。其目的是为用户提供高水平的信心，以选择符合此类需求的设备实践。由于IEC 60297和IEC 60917系列机箱、机架和插入式单元有多种尺寸、重量和机械复杂性，因此不可能为所有重量类别定义单一的最低地震测试要求。 因此，本标准定义了总体质量类别。然而，机箱和子架内的质量分布被视为“特定应用”，本文定义为“预期用途”。 关键词:机箱、机架、插件、地震测试

IEC 61587-5:2013 specifies seismic test requirements for chassis, subracks, and plug-in units as defined in the IEC 60297 and IEC 60917 series. It applies in whole or in part, only to the mechanical structures of chassis, subracks, and plug-in units for electronic equipment, according to the IEC 60297 and IEC 60917 series, and does not apply to electronic components, equipment or systems within the mechanical structures. The object of this standard is to establish a level of physical integrity of chassis, subracks, and plug-in units according to IEC 60297 and IEC 60917 series that may provide a level of survivability that will preserve functionality during and after a seismic occurrence. It is intended to provide the user with a high level of confidence in the selection of an equipment practice to meet such needs. Since IEC 60297 and IEC 60917 series chassis, subracks, and plug-in units come in many sizes, weights and mechanical complexities, it is not possible to define a single minimum seismic test requirement for all weight categories. Therefore, overall mass categories are defined in this standard. However, the mass distribution inside a chassis and subrack is considered "application-specific" and herein defined as "intended use". Key words: chassis, subracks, plug-in units, seismic tests