首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
历史 ASTM D6335-03
到馆提醒
收藏跟踪
购买正版
Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test 通过热氧化发动机油模拟试验测定高温沉积物的标准试验方法
发布日期: 2003-01-10
1.1本试验方法涵盖了利用热氧化发动机油模拟试验(TEOST)确定汽车发动机油形成的沉积物量的程序。实验室间研究已确定其适用于总沉积量为10至65 mg的范围。 注1:试验方法的运行经验表明,该试验方法适用于总沉积量在2至180 mg范围内的发动机机油。 1.2以国际单位制表示的数值应视为标准。 1.3 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。
1.1 This test method covers the procedure to determine the amount of deposits formed by automotive engine oils utilizing the thermo-oxidation engine oil simulation test (TEOST). An interlaboratory study has determined it to be applicable over the range from 10 to 65 mg total deposits. Note 1—Operational experience with the test method has shown the test method to be applicable to engine oils having deposits over the range from 2 to 180 mg total deposits. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
分类信息
关联关系
研制信息
归口单位: D02.09.0G
相似标准/计划/法规
现行
ASTM D6335-19
Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
通过热氧化发动机油模拟试验测定高温沉积物的标准试验方法
2019-12-01
现行
SH/T 0750-2005
发动机油高温氧化沉积物测定法(热氧化模拟试验法)
Standard test method for determination of high-temperature deposits by thermo-oxidation engine oil simulation test
2005-04-11
现行
NB/SH/T 0906-2015
发动机油热稳定性的测定 热管试验法
Determination of high temperature deposits of engine oils by hot tube test
2015-10-27
现行
GOST 20991-1975
Масла моторные. Метод оценки склонности масел к образованию отложений при высоких температурах
机油 测试其在高温下形成沉积物的趋势的方法
现行
NB/SH/T 0834-2010
发动机油适度高温活塞沉积物的测定 热氧化模拟试验法(TEOST MHT)
Standard test method for determination of moderately high temperature piston deposits by thermo-oxidation engine oil simulation test (TEOST MHT)
2010-05-01
现行
ASTM D7097-19
Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT
用热氧化发动机机油模拟试验测定中高温活塞沉积物的标准试验方法&x2014;TEOST MHT
2019-12-01
现行
ASTM C16-03(2018)
Standard Test Method for Load Testing Refractory Shapes at High Temperatures
高温下耐火材料形状负荷试验的标准试验方法
2018-02-01
现行
ASTM G140-02(2019)
Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
通过湿蜡法测定大气氯化物沉积速率的标准测试方法
2019-10-01
现行
UNE 51215-1987
STANDARD TEST METHOD FOR SULFUR IN PETROLEUM PRODUCTS. (HIGH TEMPERATURE METHOD)
石油产品中硫的标准试验方法 (高温法)
1987-09-15
现行
KS M 2414(2016 Confirm)
석유 제품의 황분 시험방법(고온법)
石油产品(高温法)硫含量的标准测试方法
2011-12-16
现行
KS M 2414(2021 Confirm)
석유 제품의 황분 시험방법(고온법)
石油产品中硫的标准试验方法(高温法)
2011-12-16
现行
ASTM D3769-20
Standard Test Method for Microcellular Urethanes—High-Temperature Sag
微孔聚氨酯 - 高温凹陷的标准测试方法
2020-07-01
现行
ASTM D2485-22
Standard Test Methods for Evaluating Coatings For High Temperature Service
高温环境用涂层评定的标准试验方法
2022-12-01
现行
ASTM D5015-15(2022)
Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
用电测法测定大气湿沉积样品pH值的标准试验方法
2022-03-01
现行
ASTM F1738-23
Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
空中使用的溢油分散剂沉积测定的标准试验方法
2023-03-01
现行
ASTM G142-98(2022)
Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
在高压、高温或两者下测定含氢环境中金属脆化敏感性的标准试验方法
2022-10-01
现行
BS ISO 17224-2015
Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
金属和合金的腐蚀 用盐、灰或其他物质沉积物对金属材料进行高温腐蚀试验的试验方法
2015-04-30
现行
ISO 17224-2015
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
金属和合金的腐蚀 - 通过应用盐 灰或其他物质的沉积金属材料的高温腐蚀测试的测试方法
2015-04-13
现行
GB/T 43118-2023
金属和合金的腐蚀 金属材料在盐、灰烬或其他物质的沉积物作用下进行高温腐蚀的试验方法
Corrosion of metals and alloys—Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt,ash,or other substances
2023-09-07
现行
ASTM D6514-03(2019)e1
Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
汽轮机油高温通用氧化试验的标准试验方法
2019-05-01