现行

KS W ISO 7913

항공 우주－볼트 및 나사－형상 및 위치 공차
航空航天米制螺栓和螺钉形位公差

2018-01-22

现行

KS W ISO 7913(2023 Confirm)

항공 우주－볼트 및 나사－형상 및 위치 공차
航空航天.米制螺栓和螺钉.形状和位置公差

2018-01-22

现行

ISO 7913-1994

Aerospace — Bolts and screws, metric — Tolerances of form and position
航空和航天；公制和公制螺栓和螺钉；形位公差

1994-10-13

现行

BS ISO 8788-2020

Aerospace. Nuts, metric. Tolerances of form and position
航空航天坚果 公制 形位公差

2020-05-27

现行

KS W ISO 8788(2018 Confirm)

항공우주 - 미터식 너트 - 형상 및 위치공차
航空航天米制螺母形位公差

2003-06-30

现行

ISO 8788-2020

Aerospace — Nuts, metric — Tolerances of form and position
航空航天 - 螺母 公制 - 形式和位置的公差

2020-05-18

现行

KS W ISO 8788(2023 Confirm)

항공우주 - 미터식 너트 - 형상 및 위치공차
航空航天.米制螺母.形状和位置公差

2003-06-30

现行

DIN ISO 7913

Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985
航空航天紧固件、螺栓和螺钉的形状和位置公差；与ISO 7913 1985年版相同

1986-05-01

现行

BS 919-3-2007

Screw gauge limits and tolerances. Specification for gauges for screw threads of ISO metric form
螺钉规限值和公差 ISO米制螺纹量规规范

2007-10-31

现行

AS 5066-2002

Tolerances for ISO metric bolts, screws, studs and nuts - Product grades A, B and C
ISO公制螺栓、螺钉、螺柱和螺母的公差.产品等级A、B和C

2002-09-27

现行

DIN 13-50

ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
ISO通用米制螺纹.第50部分:成型内螺纹公差等级的组合

2017-05-01

现行

BS ISO 965-4-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO通用公制螺纹 公差

2021-07-26

现行

BS ISO 965-5-1998+A1-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用公制螺纹 公差

2021-07-26

现行

ISO 965-4-2021

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
Iso通用公制螺纹螺纹 - 公差 - 第4部分:热浸镀锌外螺纹的尺寸限制 与内螺纹螺纹配合 镀镍后具有公差位置H或G

2021-07-06

现行

JIS B 0209-4-2001

ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO通用米制螺纹公差第4部分:镀锌后与公差位置为H或G的内螺纹配合的热浸镀锌外螺纹的尺寸限制

2001-01-01

现行

JIS B 0209-5-2001

ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用米制螺纹公差第5部分:镀锌前最大公差位置为h的热浸镀锌外螺纹与内螺纹配合的尺寸限制

2001-01-01

现行

ISO 965-5-1998

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用公制螺纹——公差SPART 5:与热浸镀锌外螺纹配合的内螺纹尺寸限制 镀锌前最大公差位置为h

1998-12-20

现行

GOST ISO 965-5-2015

Основные нормы взаимозаменяемости. Резьбы метрические ИСО общего назначения. Допуски. Предельные размеры внутренних резьб, сопрягаемых с горячеоцинкованными наружными резьбами, соответствующими до нанесения покрытия полям допусков с основными отклонениями до h включительно
互换性的基本规范 ISO通用公制螺纹 公差 内螺纹尺寸的限制与热镀锌外螺纹配合 镀锌前最大公差位置h

2015-08-27

现行

ISO 965-5-1998/Amd 1-2021

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing — Amendment 1
ISO通用米制螺纹.公差.第5部分:镀锌前最大公差位置为h的热浸镀锌外螺纹与内螺纹配合的尺寸限制.修改件1

2021-07-06

现行

DIN ISO 965-4

ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:1998)
ISO通用米制螺纹公差第4部分:镀锌后与公差位置为H或G的内螺纹配合的热浸镀锌外螺纹的尺寸限制

2002-05-01