现行

SAE AS5857A

Gland Design, O-Ring and Other Elastomeric Seals, Static Applications
压盖设计 O形密封圈和其他弹性密封件 静态应用

2022-08-17

现行

SAE AS6235B

Face Seal Gland Design, Static, O-Ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications
端面密封压盖设计 用于航空航天液压和气动应用的静密封、O形密封圈和其他密封

2021-11-09

现行

SAE ARP1231C

General Gland Design Criteria for Static and Dynamic O-Ring Seal Applications Specifically for Engines and Engine Control Systems
专用于发动机和发动机控制系统的静态和动态O形密封圈应用的通用压盖设计标准

2022-01-14

现行

SAE AS4873A

Gland Design, Elastomeric O-Ring Seals, Static Radial and Face 800 psi Maximum Service (Stabilized: May 2014)
压盖设计 弹性O形密封圈 静态径向和端面最大工作压力为800 psi（稳定:2014年5月）

2014-05-16

现行

SAE ARP1232C

Gland Design Criteria and Dimensions for Static Radial O-Ring Seal Applications Without Anti-Extrusion Devices Specifically for Engine and Engine Control Systems
无防挤压装置的静态径向O形密封圈应用的压盖设计标准和尺寸 专用于发动机和发动机控制系统

2020-11-30

现行

SAE ARP1233B

Gland Design Criteria and Dimensions for Dynamic Radial O-Ring Seal Applications Specifically for Engine and Engine Control Systems Operating at 1500 psi Max
动态径向O形密封圈应用的压盖设计标准和尺寸 特别适用于在最大1500 psi压力下运行的发动机和发动机控制系统

2021-04-14

现行

SAE AS5752

Aerospace - Visual Inspection Standard for Elastomeric Sealing Elements Other than O-Rings
航空航天.除O型环外的弹性密封件的目视检验标准

2019-05-17

现行

SAE MAP3440A

O-Ring Groove Design for Metric O-Ring Seals Used in Static Radial Compression Applications Specifically for Engine and Engine Control Systems
O形密封圈槽设计 用于静态径向压缩应用中的公制O形密封圈 专门用于发动机和发动机控制系统

2021-11-09

现行

SAE MAP3439A

O-Ring Groove Design for Metric O-Ring Seals Used in Static Axial Compression Applications Specifically for Engine and Engine Control Systems
O形密封圈槽设计 用于静态轴向压缩应用中的公制O形密封圈 专门用于发动机和发动机控制系统

2021-11-23

现行

SAE AS666D

Cavity Design and O-Ring Selection for Static Seal Use in Aircraft Tubeless Tire Wheels
航空无内胎轮胎车轮静密封的型腔设计和O型圈选择

2011-01-06

现行

GOST 25065-1990

Соединения трубопроводов резьбовые. Концы корпусных деталей ввертные с уплотнением резиновыми кольцами круглого сечения и гнезда под них. Конструкция
螺纹管件 壳体部件的螺纹端用橡胶密封 O型圈及其插座 设计

现行

BS ISO 6149-4-2006

Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Dimensions, design, test methods and requirements for external and internal hex port plugs
流体动力和一般用途的连接 端口和螺柱端部采用ISO 261公制螺纹和O形密封圈 外部和内部六角端口插头的尺寸、设计、试验方法和要求

2006-06-30

现行

BS EN ISO 6149-4-2017

Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for external hex and internal hex port plugs
流体动力和一般用途的连接 带有ISO 261公制螺纹和O形密封圈的端口和螺柱端

2017-10-05

现行

BS EN ISO 6149-2-2007

Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
液压传动和一般用途的连接 带有ISO 261公制螺纹和O形密封圈的端口和螺柱端

2007-03-30

现行

BS EN ISO 6149-3-2007

Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for light-duty (L series) stud ends
液压传动和一般用途的连接 带有ISO 261公制螺纹和O形密封圈的端口和螺柱端

2007-03-30

现行

SAE J2244/2_200712

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends--Dimensions, Design, Test Methods, and Requirements
流体动力和通用连接件ISO 261螺纹和O形密封圈的端口和螺柱端第2部分:重型（S系列）螺柱端尺寸、设计、试验方法和要求

2007-12-21

现行

ISO 6149-4-2017

Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
用于流体动力和一般用途的连接 - ISO 261公制螺纹和O形密封圈的端口和螺柱端 - 第4部分:外部六角和内六角螺栓插头的尺寸 设计 测试方法和要求

2017-08-09

现行

SAE J2337/3_201701

Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods (Stabilized: Jan 2017)
流体动力和高压用连接件.带ISO 261螺纹和O形密封圈的端口、螺柱端和插头.第3部分:端口插头要求、尺寸、设计和试验方法（2017年1月）

2017-01-04

现行

SAE J2244/3_200712

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing, Part 3: Light-Duty (L Series) Stud Ends--Dimensions, Design, Test Methods, and Requirements
流体动力和通用连接件ISO 261公制螺纹和O形密封圈的端口和螺柱端 第3部分:轻型（L系列）螺柱端尺寸、设计、试验方法和要求

2007-12-21

现行

SAE J2337/2_201702

Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 2: Stud End Requirements, Dimensions, Design, and Test Methods (Stabilized: Feb 2017)
流体动力和高压用连接件.带ISO 261螺纹和O形密封圈的端口、螺柱端和塞子.第2部分:螺柱端要求、尺寸、设计和试验方法（稳定:2017年2月）

2017-02-08