EN 13953:2015-液化石油气设备及配件 - 液化石油气（LPG）可运输可再填充气瓶的泄压阀-国家数字标准馆

作废 EN 13953:2015

到馆阅读

收藏跟踪

购买正版

LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) 液化石油气设备及配件 - 液化石油气（LPG）可运输可再填充气瓶的泄压阀

发布日期： 2015-03-04

废止日期： 2020-12-09

本欧洲标准规定了用于液化石油气（LPG）气瓶的弹簧加载溢流阀（PRV）的设计，测试和标记要求。
这些PRV可以是气缸阀门的一个组成部分（参见EN ISO 14245 [3]和EN ISO 15995 [4]）或单独的设备。
本欧洲标准并不排除提供类似安全等级的其他压力释放装置设计

This European Standard specifies the design, testing and marking requirements for spring loaded pressure relief valves (PRV), for use in liquefied petroleum gas (LPG) cylinders.
These PRVs can be either an integral part of a cylinder valve (see EN ISO 14245 [3] and EN ISO 15995 [4]) or a separate device.
This European Standard does not exclude the use of other designs of pressure relief devices that provide a similar level of safety.

分类信息

发布单位或类别：国际组织-欧洲标准化委员会

CCS分类： E46石油 - 石油产品 - 炼厂气体

ICS分类： 23.060.40阀门 - 压力调节器

关联关系

研制信息

归口单位： CEN/TC 286

相似标准/计划/法规

UNE-EN 13953-2004+A1-2007

LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
液化石油气设备和附件.液化石油气（LPG）用可运输可再充装钢瓶的泄压阀

BS EN 12816-2010

LPG equipment and accessories. Transportable refillable LPG cylinders. Disposal
液化石油气设备和配件可运输的可再填充液化石油气钢瓶处置

BS EN 12807-2019

LPG equipment and accessories. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction
液化石油气设备和配件液化石油气（LPG）用可运输可再填充钎焊钢瓶设计与施工

LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
石油气设备及配件 - 液化石油气（LPG）可运输的可再填充钎焊钢瓶 - 设计和施工

LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
液化石油气设备及配件 - 用于液化石油气的可运输的可再填充焊接钢瓶 - 设计和施工

LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal
石油气设备及配件 - 可运输的可充填液化石油气瓶 - 处置

EN 14140-2014/AC-2015

LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
液化石油气设备及配件 - 用于液化石油气的可运输的可再填充焊接钢瓶 - 替代设计和施工

LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
液化石油气设备及配件 - 用于液化石油气的可运输的可再填充焊接钢瓶 - 替代设计和施工

BS 09/30200854 DC

BS EN 12816. LPG equipment and accessories. Transportable refillable LPG cylinders. Disposal
英国标准EN 12816 液化石油气设备和配件可运输的可再填充液化石油气钢瓶处置

BS EN 1440-2016+A2-2020

LPG equipment and accessories. Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders. Periodic inspection
液化石油气设备和配件可运输、可重复填充的传统焊接和钎焊钢制液化石油气（LPG）钢瓶定期检查

BS 08/30167437 DC

BS EN ISO 28622. Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG)
BS EN ISO 28622 液化石油气（LPG）用可运输可再充装气瓶的泄压阀

LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels
LPG设备及配件 - 液化石油气压力容器的泄压阀

BS EN 16728-2016+A2-2020

LPG equipment and accessories. Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders. Periodic inspection
液化石油气设备和配件除传统焊接和钎焊钢瓶外的可运输可再填充液化石油气钢瓶定期检查

KS B ISO 22991(2019 Confirm)

가스 용기 — 운반 가능한 재충전용 용접 강제 LPG 용기 — 설계 및 제조
气瓶 - 用于液化石油气（LPG）的可运输的可再填充焊接钢瓶 - 设计和施工

DIN EN ISO 28622-DRAFT

Draft Document - Gas cylinders - Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG) (ISO/DIS 28622:2008); German version prEN ISO 28622:2008
文件草案——气瓶——液化石油气（LPG）用可运输可再充装气瓶的泄压阀（ISO/DIS 28622-2008）；德文版prEN ISO 28622:2008

BS EN 1439-2021

LPG equipment and accessories. Procedure for checking transportable refillable LPG cylinders before, during and after filling
液化石油气设备和配件加注前、加注中和加注后检查可运输可再加注LPG气瓶的程序

DIN EN 1440/A2-DRAFT

Draft Document - LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection; German and English version EN 1440:2016+A1:2018/prA2:2019
文件草案——液化石油气设备和附件——可运输、可重复填充的传统焊接和钎焊钢制液化石油气（LPG）气瓶——定期检查；德语和英语版本EN 1440:2016+A1:2018/prA2:2019

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统