纸质印刷品覆膜过程控制及检测方法 第2部分：乙烯-醋酸乙烯共聚物（EVA）热熔胶预涂覆膜
Lamination process control and testing methods for paper prints - Part 2: Lamination with EVA adhesive

2011-12-30

纸质印刷品覆膜过程控制及检测方法 第1部分:基本要求
Lamination process control and test method for paper prints Part 1:Elementary rules

2007-11-16

纸质印刷品覆膜过程控制及检测方法 第1部分：基本要求
Lamination process control and testing methods for paper prints - Part 1: General requirements

2011-12-30

纸质印刷品覆膜过程控制及检测方法 第3部分：水基胶黏剂即涂干式覆膜
Lamination process control and testing methods for paper prints - Part 3: Drying lamination with water-based adhesive

2011-12-30

凹印联线复合剥离过程控制要求及检验方法
Process control requirements and test methods of in-line lamination-delamination for gravure printing

2019-11-28

印刷品裱贴瓦楞纸板过程控制要求及检验方法
The process control requirements and test methods for corrugated board laminating with printed paper

2017-05-18

纸质印刷品覆膜过程控制及检测方法 第4部分：反应型聚氨酯（PUR）热熔胶即涂覆膜
Lamination process control and testing methods for paper prints - Part 4: Lamination with polyurethane reactive hot melt adhesive

2011-12-30

Датчики для применения в системах управления промышленным процессом. Часть 2. Методы приемочных и типовых испытаний
变送器用于工业过程控制系统 第2部分检查和常规检测方法

工业过程控制系统用变送器 第2部分：检查和例行试验方法
Transmitters for use in industrial-process control systems—Part 2: Methods for inspection and roution testing

2015-02-04

BS EN 60770-2. Transmitters for use in industrial- process control systems. Part 2. Methods for inspection and routine testing
英国标准EN 60770-2 工业过程控制系统用变送器 第二部分 检验和例行试验方法

2008-01-24

IEC 61298-2 ED 2. Process measurement and control. General methods and procedures for evaluating performance. Part 2. Tests reference conditions
IEC 61298-2第2版 过程测量和控制 评估绩效的一般方法和程序 第二部分 测试参考条件

2005-10-14

Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions
过程测量和控制设备 - 评估性能的一般方法和程序 - 第2部分:参考条件下的测试

2008-10-08

过程测量和控制装置 通用性能评定方法和程序 第2部分：参比条件下的试验
Process measurement and control devices—General methods and procedures for evaluating performance—Part 2:Tests under reference conditions

2017-07-12

Приборы измерения и управления промышленным процессом. Общие методы и процедуры оценки рабочих характеристик. Часть 2. Испытания при нормальных условиях
过程测量和控制设备 评估性能的一般方法和程序 参考条件下的测试

工业自动化仪表通用试验方法 第2部分：电源电压频率变化抗扰度试验
General methods for testing the performance of industrial process measurement and control instruments-Part 2:Supply voltage and frequency variations immunity test

2007-10-08

IEC 61298-3 ED 2. Process measurement and control. General methods and procedures for evaluating performance. Part 3. Tests for the effects of influence quantities
IEC 61298-3第2版 过程测量和控制 评估绩效的一般方法和程序 第三部分 影响量影响的测试

2005-10-14

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-721: Test methods for materials for interconnection structures - Measurement of relative permittivity and loss tangent for copper clad laminate at microwave frequency using a split post dielectric resonator
电气材料、印制板和其他互连结构和组件的试验方法.第2-721部分:互连结构材料的试验方法.使用分裂柱介质谐振器在微波频率下测量覆铜板的相对介电常数和损耗正切

2015-04-29

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-721: Test methods for materials for interconnection structures - Measurement of relative permittivity and loss tangent for copper clad laminate at microwave frequency using split post dielectric resonator (IEC 61189-2-721:2015); German version EN 61189-2-721:2015
电气材料、印制板和其他互连结构和组件的试验方法第2-721部分:互连结构材料的试验方法用分裂柱d测量微波频率下覆铜板的相对介电常数和损耗正切

2016-03-01