BS IEC 60317-4:2015规定了可焊接漆包圆铜的要求 130级绕组线，底涂层基于聚氨酯树脂，可 改性，前提是它保留了原树脂的化学特性，并符合所有规定 电线要求。注:改性树脂是经过化学变化的树脂，或含有一种或多种添加剂的树脂 增强某些性能或应用程序特性。本标准涵盖的标称导体直径范围为:1级:0018 mm至2000 mm（含2000 mm）；2级:0020毫米至2000毫米（含2000毫米）。IEC 60317-0-1:2013第4条规定了标称导体直径。交叉引用:IEC 60317-0-1:2013IEC 60264IEC 60317IEC 60851购买本文件时可获得的所有现行修改件均包含在购买本文件中。

BS IEC 60317-4:2015 specifies the requirements of solderable enamelled round copper winding wire of class 130 with a sole coating based on polyurethane resin, which may be modified provided it retains the chemical identity of the original resin and meets all specified wire requirements.NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics.The range of nominal conductor diameters covered by this standard is:Grade 1: 0,018 mm up to and including 2,000 mm;Grade 2: 0,020 mm up to and including 2,000 mm.The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013.Cross References:IEC 60317-0-1:2013IEC 60264IEC 60317IEC 60851All current amendments available at time of purchase are included with the purchase of this document.