BS ISO 8178-6:2018规定了一种数据格式，用于报告移动、可运输和固定用途RIC发动机的废气排放测量结果，不包括主要用于道路用途的机动车发动机。它包括被测试发动机的基本信息。只要提供所需的发动机、测试单元和测试数据信息，就可以使用等效数据格式，包括电子生成的数据格式。本文件适用于实验室和现场（如适用）的测量。对于附加要求（如职业健康和安全法规、发电厂粉尘法规）涵盖的机械中使用的发动机，可采用附加试验条件和特殊评估方法。交叉引用:ISO 8178（所有部分）ISO 660ISO 3405ISO 3015ISO 3016ISO 8217ISO 3733ISO 3104ISO 3735ISO 4260EN 238ISO 10478ISO 8754ISO 3007ISO 5163ISO 5164ISO 2719ISO 6615ISO 6245ISO 6246ISO 3830ISO 8691ISO 3675EN 116ISO 4264ISO 7536ISO 3837ISO 2160ISO 5165购买本文件时提供的所有当前修订版均包括在内。

BS ISO 8178-6:2018 specifies a data format for reporting the measurement results of exhaust emissions from RIC engines for mobile, transportable and stationary use, excluding engines for motor vehicles primarily designed for road use. It includes basic information of the engine being tested. Equivalent data formats including those that are electronically generated can be used as long as the required engine, test cell and test data information is made available.This document applies to measurement in the laboratory and, where applicable, at site.For engines used in machinery covered by additional requirements (e.g. occupational health and safety regulations, dust regulations for powerplants), additional test conditions and special evaluation methods can apply.Cross References:ISO 8178 (all parts)ISO 660ISO 3405ISO 3015ISO 3016ISO 8217ISO 3733ISO 3104ISO 3735ISO 4260EN 238ISO 10478ISO 8754ISO 3007ISO 5163ISO 5164ISO 2719ISO 6615ISO 6245ISO 6246ISO 3830ISO 8691ISO 3675EN 116ISO 4264ISO 7536ISO 3837ISO 2160ISO 5165All current amendments available at time of purchase are included with the purchase of this document.