1.1 本规范涵盖了当受灾船舶出现系统故障时，在紧急情况下与海上消防系统一起使用的国际海岸连接件的设计和制造。 1.2 国际海岸连接是一种便携式通用连接器，允许在一艘船和另一艘船之间或海岸设施和船只之间连接船上消防总管系统，当其各自的系统螺纹不匹配时。船舶和设施均应配备配件，以便在紧急情况下可以连接到各自的消防软管，并用螺栓固定在一起，以便为船舶系统充电。它必须是便携式的，以适应软管到软管的连接，并允许从任何位置提供协助。 1.3 国际条约要求国际海岸连接 2. , 3. 所有总吨或以上的客船和货船，无论消防水管大小，均应装载在国际航行中，并建议所有预计提供援助的船舶使用。 还计划在海岸设施处提供，用于向船舶消防总管系统供水。 1.4 本规范不排除在船舶、船厂或其他岸上设施上进行制造。 1.5 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers the design and manufacture of international shore connections to be used with marine fire fighting systems during an emergency when a stricken ship has a system failure. 1.2 International shore connections are portable universal couplings that permit connection of shipboard firemain systems between one ship and another or between a shore facility and a ship when their respective system threading is mismatched. Both the ship and the facility are expected to have a fitting such that in an emergency can be attached to their respective fire hose and bolted together to permit charging the ship's system. It must be portable to accommodate hose to hose connection and allow assistance from any position. 1.3 The international shore connection is required by international treaty 2 , 3 to be carried onboard all passenger and cargo vessels of 500 gross tons or more, regardless of firemain size, engaged in international voyages, and is recommended for all vessels that would be expected to render assistance. It is also intended to be provided at shore facilities that would be used to supply water to a ship’s firemain system. 1.4 Fabrication either on board a vessel, in a shipyard, or other shore facility is not precluded by this specification. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.