Connectors for printed boards (flat contacts, single row); edge socket connectors-edge board contacts
印制板连接器（扁平触点 单列）；边缘插座连接器边缘板触点

1970-09-01

印制板插头镍基底酸性镀硬金技术要求
Technical requirements for nickel-base acid hard gold plating of printed circuit board edge contact

2011-07-19

Detail specification for multi-contact edge socket electrical connectors. Single or double sided, closed ended, replaceable contacts, through-board solder or wire wrap terminations. Full assessment level
多触点边缘插座电气连接器详细规范 单面或双面、封闭端、可更换触点、贯穿板焊料或绕线终端 全面评估水平

1978-02-15

Materials and articles in contact with foodstuffs. Cutlery and holloware-Specification for sharpness and edge retention test of cutlery
与食品接触的材料和物品 餐具和凹形餐具

2005-01-24

Detail specification for multi-contact edge socket electrical connectors. Single or double sided, open ended, guide key location, replaceable contacts, through-board solder or wire wrap terminations. Full assessment level
多触点边缘插座电气连接器详细规范 单面或双面、开口、导向键位置、可更换触点、贯穿板焊料或绕线终端 全面评估水平

1979-10-15

Connectors for frequencies below 3 MHz for use with printed boards-Edge-socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness
用于印制板的频率低于3MHz的连接器 标称厚度为1.6 mm（0063 in.）的单面或双面印制板的接触间距为2.54 mm（0.1 in.）的边缘插座连接器和印制板连接器

1998-05-15

Detail specification for multi-contact edge socket electrical connectors. Single or double sided, open ended, metal fixing flanges, guide key location, replaceable contacts, through-board solder or wire wrap terminations. Full assessment level
多触点边缘插座电气连接器详细规范 单面或双面、开口、金属固定法兰、导键位置、可更换触点、贯穿板焊料或绕线终端 全面评估水平

1979-02-15

Detail specification for multi-contact two-part printed board electrical connectors
多触点两部分印制板电连接器详细规范

1992-06-01

인쇄 기판에 사용하는 3 MHz 미만 주파수용 커넥터 — 제6부: 공칭 두께가 1.6 mm(0.063 in)인 단면/양면 인쇄 기판용 에지 소켓 커넥터 및 인쇄 기판 커넥터[접점 간격 2.54 mm(0.1 in)]
连接器下面3MHz的印制板用频率 第6部分:边缘插座连接器和印刷电路板连接器 带（在0.063）2.54毫米（0.1英寸）的接触间距为1.6mm的单面或双面印刷电路板标称厚度

2014-12-09

인쇄 기판에 사용하는 3 MHz 미만 주파수용 커넥터 — 제6부: 공칭 두께가 1.6 mm(0.063 in)인 단면/양면 인쇄 기판용 에지 소켓 커넥터 및 인쇄 기판 커넥터[접점 간격 2.54 mm(0.1 in)]
印制板用频率低于3MHz的连接器第6部分:标称厚度为1.6mm（0.063in）的单面或双面印制板用2.54mm（0.1in）触点间距的边缘插座连接器和印制板连接器

2014-12-09

Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness
频率低于3 MHz的连接器用于印刷电路板 - 第6部分:边缘插座连接器和印刷电路板连接器 具有1,64 mm（0,063）单面或双面印刷电路板的2,54 mm（0,1 in）接触间距in）公称厚度

1987-01-01

Connectors for frequencies below 3 MHz for use with printed boards -- Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness.
印制板用频率低于3MHz的连接器第6部分:标称厚度为1.6mm（0063in）的单面或双面印制板用接触间距为2.54mm（0.1in）的边缘插座连接器和印制板连接器

2001-09-21

음식물과 접촉하는 재료와 물품 —날붙이류 및 식기류 — 제5부: 날붙이의 날카로움과 날의 보존 시험 방법
与食品接触的材料和物品.餐具和凹形餐具.第5部分:餐具锋利度和边缘保持试验规范

2021-12-20

음식물과 접촉하는 재료 및 물품－식탁용 날붙이 및 식기류－제5부：날붙이의 날카로움과 날의 보존 시험 방법
与食品接触的材料和物品餐具和凹形餐具第5部分:餐具锋利度和边缘保持力试验规范

2006-11-30

Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 5: Specification for sharpness and edge retention test of cutlery
与食品接触的材料和物品——餐具和餐桌镂空餐具第5部分:餐具锋利度和边缘保持力试验规范

2004-12-08

Harmonized system of quality assessment for electronic components. Sectional specification. Two part and edge socket connectors for printed board applications
电子元件质量评定协调体系 分规范 印制板应用的两件式和边缘插座连接器

1993-06-15

Specification for harmonized system of quality assessment for electronic components. Example detail specification/blank detail specification. Two-part and edge socket connectors for printed board application
电子元件质量评定协调体系规范 示例详细规范/空白详细规范 印制板用两件式和边缘插座连接器

1984-11-15

Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 5: Specification for sharpness and edge retention test of cutlery (ISO 8442-5:2004)
与食品接触的材料和物品.餐具和凹形餐具.第5部分:餐具锋利度和边缘保持试验规范（ISO 8442-5-2004）；德文版EN ISO 8442-5:2004

2005-04-01

Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 5: Specification for sharpness and edge retention test of cutlery (ISO 8442-5:2004)
与食品接触的材料和物品刀具和凹形餐具第5部分:刀具锋利度和边缘保持力试验规范

2005-06-08

Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2.54 mm (0.1 in) contact spacing for single or double-sided printed boards of 1.6 mm (0.063 in) nominal thickness (IEC 60603-6:1987); German version EN 60603-6:1998
印制板用频率低于3MHz的连接器.第6部分:标称厚度为1.6mm（0.063in）的单面或双面印制板用接触间距为2.54mm（0.1in）的边缘插座连接器和印制板连接器（IEC 60603-6-1987）；德文版EN 60603-6:1998

1998-04-01