吸收钳法适用于确定屏蔽或耦合衰减 频率范围为30 MHz至1000 MHz（2400 MHz）的金属通信电缆，具体取决于夹具的性能。它是IEC 62153-4-4或IEC 62153-4-9三轴法的替代方法。由于该吸收钳方法的外部电路未定义，因此在不同地点和实验室获得的测试结果可能会相差至少±6 dB。购买本文件时可获得的所有当前修订均包含在购买本文件中。

The absorbing clamp method is suitable to determine the screening- or the coupling-attenuation of metallic communication cables in the frequency range of 30 MHz to 1 000 MHz (2 400 MHz), depending on the performance of the clamp. It is an alternative method to the triaxial method of IEC 62153-4-4 or IEC 62153-4-9. Due to the undefined outer circuit of this absorbing clamp method, the test results obtained at different places and laboratories could vary by at least ± 6 dB.All current amendments available at time of purchase are included with the purchase of this document.