IEC 60384-11:20 19适用于额定电压不超过6 300 V的固定直流电容器，使用聚对苯二甲酸乙二醇酯薄膜和薄金属箔电极作为电介质。对于额定电压超过1？000 V，附加测试和要求可在详细规范中规定。本文件涵盖的电容器旨在用于电子设备。用于抑制电磁干扰的电容器不包括在内，但在IEC 60384？14.本文件的目的是规定优选的额定值和特性，并从IEC 60384-1:20 16中选择适当的质量评估程序、测试和测量方法，并给出此类电容器的一般性能要求。参考本部分规范的详细规范中规定的试验严重性和要求具有相同或更高的性能水平。不允许较低的性能水平。 与上一版相比，此版本包括以下重大技术变更: a)根据ISO/IEC指令第2部分:2018修订文件的所有部分，并与其他类似类型的文件协调一致； b)文件结构的组织遵循TC 40中确定的新的部分规范结构； c)修订表格和第5条，以防止重复和矛盾。

IEC 60384-11:2019 is applicable to fixed direct current capacitors, for rated voltages not exceeding 6 300 V, using as dielectric a polyethylene-terephthalate film and electrodes of thin metal foils. For capacitors with rated voltages exceeding 1？000 V, additional tests and requirements may be specified in the detail specification. The capacitors covered by this document are intended for use in electronic equipment. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384？14. The object of this document is to prescribe preferred ratings and characteristics and to select from IEC 60384-1:2016 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification are of an equal or higher performance level. Lower performance levels are not permitted.
This edition includes the following significant technical changes with respect to the previous edition:
a) revision of all parts of the document based on the ISO/IEC Directives, Part 2:2018, and harmonization with other similar kinds of documents;
b) the document structure has been organized to follow new sectional specification structure decided in TC 40;
c) revised tables and Clause 5 so as to prevent duplications and contradictions.