BS EN ISO 20753:2018规定了与塑料材料制备的试样（用于模塑加工）以及板材或成型制品机加工制备的试样相关的尺寸要求。它汇编了用于获取可比数据的试样以及其他常用试样的名称和尺寸。交叉引用:ISO 294-1ISO 10350-1ISO 294-2ISO 11403-3ISO 11403-1ISO 10350-2ISO 2818ISO 295ISO 11403-2ISO 294-3ISO 293ISO 10724-1ISO 1183-1ISO 2039-2ISO 22088-1IEC 60112ISO 22088-6IEC 60426ISO 22088-5ISO 899-1ISO 22088-4ISO 1183-3ISO 179-2ISO 4589-2ISO 868ISO 180ISO 604ISO 4589-3ISO 2039-1ISO 899-2ISO 220822-2ISO 1138178ISO 8256: 2004ISO 3167:2014ISO 527-2:2012购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN ISO 20753:2018 specifies dimensional requirements relating to test specimens prepared from plastics materials intended for processing by moulding, as well as to test specimens prepared by machining from sheets or shaped articles. It compiles the designations and dimensions of test specimens used for the acquisition of comparable data and also of other frequently used specimens.Cross References:ISO 294-1ISO 10350-1ISO 294-5ISO 294-2ISO 11403-3ISO 11403-1ISO 10350-2ISO 2818ISO 295ISO 11403-2ISO 294-3ISO 293ISO 10724-1ISO 1183-1ISO 2039-2ISO 22088-1IEC 60112ISO 22088-6IEC 60426ISO 22088-5ISO 899-1ISO 22088-4ISO 1183-3ISO 179-2ISO 4589-2ISO 868ISO 180ISO 604ISO 4589-3ISO 2039-1ISO 899-2ASTM D1822-13ISO 22088-2ISO 1183-2ISO 75-2ISO 179-1ISO 22088-3ISO 11359-2ISO 306ISO 178ISO 8256:2004ISO 3167:2014ISO 527-2:2012All current amendments available at time of purchase are included with the purchase of this document.