SAE J1101_202009-摩托车驻车稳定性试验程序-国家数字标准馆

现行 SAE J1101_202009

到馆提醒

收藏跟踪

购买正版

Test Procedure for Parking Stability of Motorcycles 摩托车驻车稳定性试验程序

发布日期： 2020-09-09

侧面支架和中心支架设计用于支撑固定的两轮摩托车。本SAE标准规定了确定停车场表面载荷和稳定性极限的程序，如下所示:a支架施加在水平停车场表面上的足迹压力。B发生倾翻的停车表面的倾斜角度。C发生滚落时驻车表面的倾斜角度。

Side stands and center stands are designed to support stationary two-wheel motorcycles. This SAE Standard establishes procedures for determining parking surface loading and stability limits as follows:aThe footprint pressure exerted on a horizontal parking surface by the stand.bThe tilt angle of the parking surface at which tip-over occurs.cThe tilt angle of the parking surface at which roll-off occurs.

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

SAE J1248_202201

Performance Requirements for Parking Stability of Motorcycles
摩托车驻车稳定性的性能要求

Two-wheeled motorcycles — Parking stability of side- and centre-stands
两轮摩托车——侧看台和中间看台的驻车稳定性

SAE J1578_201410

Motorcycle Side Stand Retraction Test Procedure (Stabilized: Oct 2014)
摩托车侧架回缩试验程序（稳定:2014年10月）

SAE J2378_201411

Test Procedure for Trailer Air Reservoir Fill and Parking Brake Release Times (Stabilized: Nov 2014)
拖车储气罐加注和停车制动器释放时间的试验程序（稳定:2014年11月）

KS R 1143(2022 Confirm)

주차 브레이크 시험 방법 및 요구 성능
驻车制动器测试程序和性能要求

주차 브레이크 시험 방법 및 요구 성능
驻车制动试验程序和性能要求

SAE J1452_201811

Trailer Grade Parking Performance Test Procedure
拖车级停车性能测试程序

BS ISO 13232-6-2005+A1-2012

Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles-Full-scale impact-test procedures
摩托车摩托车驾驶员碰撞保护装置研究评估的试验和分析程序

ISO 13232-7-2005

Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
摩托车——摩托车驾驶员碰撞保护装置研究评估的试验和分析程序第7部分:摩托车碰撞试验计算机模拟的标准程序

SAE J2982_202210

Riding Range Test Procedure for On-Highway Electric Motorcycles
公路电动摩托车行驶里程试验程序

SAE J108_201312

Brake System Road Test Code – Motorcycles (Stabilized: Dec 2013)
制动系统道路测试代码？摩托车（稳定:2013年12月）

SAE J360_202008

Truck and Bus Grade Parking Performance Test Procedure
卡车和公共汽车级停车性能测试程序

ISO 13232-6-2005

Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 6: Full-scale impact-test procedures
摩托车——摩托车驾驶员碰撞保护装置研究评估的试验和分析程序第6部分:全尺寸碰撞试验程序

BS ISO 13232-4-2005

Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles-Variables to be measured, instrumentation and measurement procedures
摩托车摩托车驾驶员碰撞保护装置研究评估的试验和分析程序

BS ISO 21755-2-2020

Motorcycles. Measurement method for evaporative emissions-Permeation test procedure
摩托车蒸发排放的测量方法

ISO 13232-7-2005/Amd 2-2023

Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests — Amendment 2: Correlation factors
摩托车.安装在摩托车上的骑车人碰撞保护装置研究评价的试验和分析程序.第7部分:摩托车碰撞试验计算机模拟的标准化程序.修改件2:相关系数

ISO 13232-7-2005/Amd 1-2012

Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests — Amendment 1: Ground impact
地面撞击

汽车操纵稳定性试验方法
Controllability and stability test procedure for automotive

SAE J1729_201910

Parking Brake Drawbar Pull Test Procedure - Truck and Bus
驻车制动器牵引杆拉力测试程序-卡车和客车

SAE J2690_202110

Driveline Parking Brake Test Procedure for Medium Duty Vehicles
中型车辆的动力传动系驻车制动测试程序

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统