首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 IEC 60953-1:1990
到馆阅读
收藏跟踪
购买正版
Rules for steam turbine thermal acceptance tests. Part 1: Method A - High accuracy for large condensing steam turbines 蒸汽轮机热接收试验规则 第1部分:方法A - 大型冷凝蒸汽轮机的高精度
发布日期: 1990-12-31
规定对汽轮机进行非常精确的测试,以获得 具有最小测量不确定度的性能水平。定义 准备和进行评估的统一规则 验收测试。还定义了 应进行验收测试。进行这项工作的成本是多少 一般来说,对于大型设备,试验方法在经济上是合理的 和/或固有型单位。
Specifies very accurate testing of steam turbines to obtain the level of performance with minimum measuring uncertainty. Defines uniform rules for preparing and carrying out an evaluation of the acceptance tests. Defines also the conditions under which the acceptance tests shall take place. The cost for conducting this test method will generally be justified economically for large and/or proptotype units.
分类信息
关联关系
研制信息
归口单位: TC 5
相似标准/计划/法规
现行
KS B IEC 60953-1
증기 터빈의 열 인수성능 시험에 대한 규칙 제1부: 방법 A — 대형 응축 증기 터빈에 대한 높은 정확도
汽轮机热验收试验规则第1部分:方法A:大型冷凝式汽轮机的高精度
2022-12-28
现行
GB/T 8117.1-2008
汽轮机热力性能验收试验规程 第1部分: 方法A 大型凝汽式汽轮机高准确度试验
Rules for steam turbine thermal acceptance tests - Part 1: Method A - High accuracy for large condensing steam turbines
2008-07-02
现行
IEC 60953-3-2022
Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines
汽轮机热验收试验规则第3部分:改装汽轮机的热性能验证试验
2022-07-20
现行
GB/T 8117.3-2014
汽轮机热力性能验收试验规程 第3部分:方法C 改造汽轮机的热力性能验证试验
Rules for steam turbine thermal acceptance test―Part 3: Method C―Thermal performance verification tests of retrofitted steam turbines
2014-12-22
现行
GB/T 8117.4-2017
汽轮机热力性能验收试验规程 第4部分:方法D 汽轮机及其热力循环简化性能试验
Rules for steam turbine thermal acceptance test—Part 4: Method D—Simplified performance test rules for steam turbine and its thermal cycle
2017-11-01
现行
IEC 60953-0-2022
Rules for steam turbine thermal acceptance tests - Part 0: Wide range of accuracy for various types and sizes of turbines
汽轮机热验收试验规则第0部分:各种类型和尺寸汽轮机的大范围精度
2022-05-30
现行
GB/T 8117.2-2008
汽轮机热力性能验收试验规程 第2部分: 方法B 各种类型和容量的汽轮机宽准确度试验
Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines
2008-07-02