本文件规定了制冷系统（包括热泵）中使用的阀门和具有类似阀体的其他部件（以下称为阀门）的安全要求、某些功能要求和标记。 本文件包括对带有延长管的阀门的要求。 本文件描述了设计受压阀门部件时应遵循的程序以及材料选择标准。 本文件描述了以安全方式考虑低温下降低的冲击值的方法。 本文件适用于泄压装置（包括爆破片装置）的阀体和阀盖的设计，但不适用于泄压力装置设计或应用的任何其他方面。 此外，本文件适用于最高工作温度不超过200°C且最大允许压力不超过160 bar的阀门[1]。   [1] 1巴=0.1 MPa。

This document specifies safety requirements, certain functional requirements, and marking of valves and other components with similar bodies, hereinafter called valves, for use in refrigerating systems including heat pumps. This document includes requirements for valves with extension pipes. This document describes the procedure to be followed when designing valve parts subjected to pressure as well as the criteria to be used in the selection of materials. This document describes methods by which reduced impact values at low temperatures may be taken into account in a safe manner. This document applies to the design of bodies and bonnets for pressure relief devices, including bursting disc devices, with respect to pressure containment but it does not apply to any other aspects of the design or application of pressure relief devices. In addition, this document is applicable to valves with a maximum operating temperature not exceeding 200 °C and a maximum allowable pressure not exceeding 160 bar[1].   [1] 1 bar = 0,1 MPa.