ISO 7-1:1994-螺纹杆1上有压力密封接头的管螺纹:尺寸、公差和名称-国家数字标准馆

现行 ISO 7-1:1994

到馆阅读

收藏跟踪

购买正版

Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation 螺纹杆1上有压力密封接头的管螺纹:尺寸、公差和名称

发布日期： 1994-05-12

                规定了名称，并规定了管螺纹的尺寸和公差。给出术语和定义、符号和解释，包括螺纹完整名称的示例。图1至图4显示了细节。将1/16至6英寸（含6英寸）的螺纹尺寸制成表格。

Specified the designation and lays down the dimensions and tolerances of pipe threads. Gives terms and definition as well as symbols and explanations including examples of the complete designation for a thread. Figures 1 to 4 illustrate details. Tabulates thread dimensions from 1/16 up to and including 6 inch.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 21.040.30螺纹 - 特殊螺纹

关联关系

研制信息

归口单位： ISO/TC 5/SC 5

相似标准/计划/法规

米制密封螺纹
Metric threads where pressure-tight joints are made on the threads

55°非密封管螺纹
Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads

GB/T 12716-2011

60°密封管螺纹
Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads

GB/T 29537-2013

80°非密封管螺纹
Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads

KS B ISO 7-1(2017 Confirm)

나사 압력 죔 이음쇠용 관나사－치수, 허용오차 및 호칭
螺纹上有压力密封接头的管螺纹尺寸、公差和名称

KS B ISO 7-1(2022 Confirm)

나사 압력 죔 이음쇠용 관나사－치수, 허용오차 및 호칭
螺纹上形成压力密封接头的管螺纹－尺寸、公差和名称

BS EN ISO 228-1-2003

Pipe threads where pressure-tight joints are not made on the threads-Dimensions, tolerances and designation
未在螺纹上进行压力密封接头的管道螺纹

JB/T 10031-2019

55°密封管螺纹量规
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads

GB/T 10922-2006

55°非密封管螺纹量规
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads

BS EN 10226-3-2005

Pipes threads where pressure-tight joints are made on the threads-Verification by means of limit gauges
管道螺纹螺纹上有压力密封接头通过极限量规进行验证

BS EN ISO 228-2-2003

Pipe threads where pressure-tight joints are not made on the threads-Verification by means of limit gauges
未在螺纹上进行压力密封接头的管道螺纹

KS B ISO 228-1(2022 Confirm)

압력 조임 이음쇠용 관나사－치수, 허용 오차 및 호칭
非螺纹压力密封接头的管螺纹第1部分:尺寸、公差和名称

KS B ISO 228-1(2017 Confirm)

압력 조임 이음쇠용 관나사－치수, 허용 오차 및 호칭
非紧压连接管螺纹第1部分:尺寸、公差和命名

AS ISO 7.1-2008

Pipe threads where pressure-tight joints are made on the threads, Part 1: Dimensions, tolerances and designation
螺纹上有压力密封接头的管螺纹第1部分:尺寸、公差和名称

Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation
未在螺纹上进行压力密封接头的管螺纹第1部分:尺寸、公差和名称

KS B ISO 7-2(2018 Confirm)

나사 압력 조임 이음쇠용 관나사－제2부：한계 게이지를 이용한 검증
螺纹上有耐压接头的管螺纹第2部分:用极限量规检验

KS B ISO 7-2(2023 Confirm)

나사 압력 조임 이음쇠용 관나사－제2부：한계 게이지를 이용한 검증
螺纹上有压力密封接头的管螺纹第2部分:用极限量规检验

AS ISO 7.2-2008

Pipe threads where pressure-tight joints are made on the threads, Part 2: Verification by means of limit gauges
螺纹上有压力密封接头的管螺纹第2部分:用极限量规进行验证

Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges
螺纹上有压力密封接头的管道螺纹.第3部分:用极限量规进行检验；德文版EN 10226-3:2005

UNE-EN 10226-3-2005

Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
螺纹上有压力密封接头的管道螺纹.第3部分:极限量规的检验

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统