1.1本试验方法包括测定润滑脂在正常填充和部分填充容器中储存期间分离油的趋势。 1.2本试验方法不适用于低于NLGI 1级的润滑脂。 1.3除和中的尺寸外，以国际单位制表示的数值应视为标准值，其中英寸-磅单位为标准单位。 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 有关具体的危险说明，请参阅。 ====意义和用途====== 当润滑脂分离油时，剩余成分的稠度增加。 这可能会影响产品按设计运行的能力。 已经发现，该测试的结果与35 lb桶润滑脂在储存期间发生的油分离直接相关。 本试验方法不用于预测动态条件下润滑脂的油分离趋势。

1.1 This test method covers the determination of the tendency of a lubricating grease to separate oil during storage in both normally filled and partially filled containers. 1.2 This test method is not suitable for greases softer than NLGI No. 1 grade. 1.3 The values stated in SI units are to be regarded as standard, except for the dimensions in and, where inch-pound units are standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see. ====== Significance And Use ====== When a lubricating grease separates oil, the remaining composition increases in consistency. This can affect the ability of the product to function as designed. It has been found that the results of this test correlate directly with the oil separation that occurs in 35-lb pails of grease during storage. This test method is not intended to predict oil separation tendencies of the grease under dynamic conditions.