本文件规定了使用试验或测量结果及其相关测量不确定度检查可量化特性符合性的指南。 本文件适用于根据规定原则量化不确定性的情况在里面ISO/IEC？标准指导98？3（胶）。因此，术语不确定度是测量结果中所有变化元素的描述符，包括采样引起的不确定度。 本文件没有给出在获得一致性试验的非决定性结果时如何采取行动的规则。 注意受要求约束的实体的性质和可量化特征没有限制。表？中给出了实体和可量化特征的示例A. 1.

This document sets out guidelines for checking conformity with quantifiable characteristics using the test or measurement result and its associated measurement uncertainty. This document is applicable whenever the uncertainty may be quantified according to the principles laid down？in？ISO/IEC？Guide？98？3 (GUM). The term uncertainty is thus a descriptor for all elements of variation in the measurement result, including uncertainty due to sampling. This document does not give rules for how to act when an inconclusive result of a conformity test has been obtained. NOTE？There are not limitations on the nature of the entity subject to the requirements nor on the quantifiable characteristic. Examples of entities together with quantifiable characteristics are given in Table？A.1.