现行

MIL MIL-B-52919A Notice 1-Validation

BELTS, V: INDUSTRIAL DRIVE, NARROW TYPE (S/S BY A-A-52422)
BELTS V:工业驱动 NARROW TYPE（S/S BY A-A-52422）

1989-05-16

现行

MIL MS39259B Notice 2-Cancellation

BELTS, V: INDUSTRIAL (MULTIPLE DRIVE) "E" CROSS SECTION (NO S/S DOCUMENT)
BELTS V:工业（多驱动）“E”横截面（无S/S文件）

1993-02-24

现行

MIL MS51070D Notice 1-Validation

BELTS, V: ENGINE ACCESSORY DRIVE (1 INCH NOMINAL WIDTH) (SUPERSEDING MS51070C)
BELTS V:发动机附件驱动（1 INCH NOMINAL WIDTH）（取代MS51070C）

1989-05-24

现行

MIL MIL-B-17693E Amendment 1

BELTS, COATS, MAN'S: POLYESTER/WOOL (S/S BY A-A-55222) (SUPERSEDING MIL-B-17693D)
BELTS COATS MAN'S:POLYESTER/WOOL（S/S BY A-A-55222）（取代MIL-B-17693D）

1988-05-19

现行

MIL MS51069D Notice 1-Validation

BELTS, V: ENGINE ACCESSORY DRIVE (7/8 INCH NOMINAL WIDTH) (SUPERSEDING MS51069C)
BELTS V:发动机附件驱动（7/8 INCH NOMINAL WIDTH）（取代MS51069C）

1989-05-24

现行

MIL MS51067D Notice 1-Validation

BELTS, V: ENGINE ACCESSORY DRIVE (11/16 INCH NOMINAL WIDTH) (SUPERSEDING MS51067C)
BELTS V:发动机附件驱动（11/16 INCH NOMINAL WIDTH）（取代MS51067C）

1989-05-24

现行

MIL MS51068D Notice 1-Validation

BELTS, V: ENGINE ACCESSORY DRIVE (3/4 INCH NOMINAL WIDTH) (SUPERSEDING MS51068C)
BELTS V:发动机附件驱动（3/4 INCH NOMINAL WIDTH）（取代MS51068C）

1989-05-24

现行

MIL MS51069D Notice 2-Validation

BELTS, V: ENGINE ACCESSORY DRIVE (7/8 INCH NOMINAL WIDTH) (SUPERSEDING MS51069C)
BELTS V:发动机附件驱动（7/8 INCH NOMINAL WIDTH）（取代MS51069C）

2005-06-10

现行

MIL MS51067D Notice 2-Validation

BELTS, V: ENGINE ACCESSORY DRIVE (11/16 INCH NOMINAL WIDTH) (SUPERSEDING MS51067C)
BELTS V:发动机附件驱动（11/16 INCH NOMINAL WIDTH）（取代MS51067C）

2005-06-10

现行

MIL MS39278A Notice 2-Cancellation

BELTS, "V" : INDUSTRIAL (NARROW TYPE) "5V" AND "15N" SECTIONAL DESIGNATION. (S/S BY A-A-52422)
BELTS “V”:工业（窄型）“5V”和“15N”部分指定 （S/S BY A-A-52422）

1993-01-12

现行

KS P 8405

의료용 트레드밀
医疗跑步机

2018-12-21

现行

KS P 8405

의료용 트레드밀
医用跑步机

2023-12-28

现行

ASTM F2115-19

Standard Specification for Motorized Treadmills
电动跑步机的标准规格

2019-12-01

现行

JJF 1722-2018

运动平板仪校准规范
Calibration Specification for Exercise Treadmills

2018-12-25

现行

ASTM F2106-18

Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
评价电动跑步机设计和性能特性的标准试验方法

2018-06-01

现行

BS EN 957-6-2010+A1-2014

Stationary training equipment-Treadmills, additional specific safety requirements and test methods
固定式训练设备

2014-06-30

现行

BS ISO 20957-6-2021

Stationary training equipment-Treadmills, additional specific safety requirements and test methods
固定式训练设备

2021-02-11

现行

GOST R 56441-2015

Тренажеры стационарные. Беговые дорожки. Дополнительные специальные требования безопасности и методы испытаний
力量训练器材 跑步机额外的具体安全要求和测试方法

现行

JB/T 8947-2008

固定室带式真空过滤机用橡胶滤带
Belt for rubber belt filter

2008-06-04

现行

UNE 18153-1981

SYNCHRONOUS BELT DRIVES. BELTS.
同步带传动 皮带

1981-09-15