IEC 60317-60-2:20 20规定了聚酯玻璃纤维缠绕、树脂或清漆浸渍、裸露或1级或2级漆包矩形铜绕组线的要求，温度指数155。浸渍剂可以是例如环氧树脂、聚酯或聚酯酰亚胺树脂基的。本文件涵盖的标称导体尺寸范围为: -宽度:最小。2.0 mm最大16.0 mm； -厚度:最小。最大0.80毫米。5.60毫米。 笔记？对于这种类型的导线，热冲击测试是不合适的，因此不能确定热冲击温度。因此，不能指定基于温度指数和热冲击温度要求的等级。

IEC 60317-60-2:2020 specifies the requirements of polyester glass-fibre wound, resin or varnish impregnated, bare or grade 1 or grade 2 enamelled rectangular copper winding wires, temperature index 155. The impregnating agent can be, for instance, epoxy, polyester, or polyesterimide resin based. The range of nominal conductor dimensions covered by this document is:
– width: min. 2,0 mm max. 16,0 mm;
– thickness: min. 0,80 mm max. 5,60 mm.
NOTE？For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified.