Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Determination of the degree of misalignment in uniaxial mechanical tests
精细陶瓷（高级陶瓷、高级工业陶瓷） 陶瓷复合材料 单轴力学试验中错位程度的测定

2016-07-31

Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Determination of the degree of misalignment in uniaxial mechanical tests
精细陶瓷（高级陶瓷、高级工业陶瓷） 陶瓷复合材料 单轴力学试验中错位程度的测定

2014-05-31

Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Determination of the degree of misalignment in uniaxial mechanical tests
精细陶瓷（高级陶瓷、高级工业陶瓷）——陶瓷复合材料——单轴力学试验中未对准度的测定

2014-02-20

Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests (ISO 17161:2014)
精细陶瓷（高级陶瓷 高级工业陶瓷）.陶瓷复合材料.单轴机械试验中错位程度的测定（ISO 17161-2014）

2016-10-01

Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements-Determination of linear density
高级技术陶瓷 陶瓷复合材料 钢筋的试验方法 线密度的测定

2002-11-19

Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements-Determination of size content
高级技术陶瓷 陶瓷复合材料 钢筋的试验方法 浆料含量的测定

2002-11-19

Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 2: Determination of linear density
先进技术陶瓷——陶瓷复合材料；钢筋的试验方法.第2部分:线密度的测定；德文版EN 1007-2:2002

2002-12-01

Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 1: Determination of size content
先进技术陶瓷——陶瓷复合材料；钢筋的试验方法.第1部分:尺寸含量的测定；德文版EN 1007-1:2002

2002-12-01

Композиты керамические. Метод определения предела прочности при растяжении в направлении толщины образца при нормальной температуре
陶瓷复合材料 室温下测定横向拉伸强度的试验方法

土壤检测 第3部分：土壤机械组成的测定
Soil Testing Part 3:Method for determination of soil mechanical composition

2006-07-10

Композиты древесно-полимерные. Методы определения механических характеристик при изгибе
木质聚合物复合材料 弯曲力学性能测定的试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of the interlaminar shear strength and shear modulus of continuous-fibre-reinforced composites by the compression of double-notched test pieces and by the Iosipescu test
精细陶瓷（高级陶瓷、高级工业陶瓷）陶瓷复合材料室温力学性能用双缺口试件压缩和Iosipescu试验测定连续纤维增强复合材料的层间剪切强度和剪切模量

2023-10-04

Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature-Determination of interlaminar shear strength by compression loading of notched test specimens
高级技术陶瓷 室温下陶瓷复合材料的机械性能 通过缺口试样的压缩载荷测定层间剪切强度

2003-03-07

Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of the resistance to crack propagation by notch sensitivity testing
精细陶瓷（先进陶瓷 先进技术陶瓷） - 空气大气压下环境温度下陶瓷复合材料的机械性能 - 通过缺口敏感性试验测定裂纹扩展的抗性

2017-03-06

Advanced technical ceramics. Methods of test for ceramic coatings-Determination of chemical composition by electron probe microanalysis (EPMA)
高级技术陶瓷 陶瓷涂层的试验方法 用电子探针微量分析法（EPMA）测定化学成分

2006-06-30

Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements-Determination of filament diameter and cross-section area
高级技术陶瓷 陶瓷复合材料 钢筋的试验方法 灯丝直径和横截面积的测定

2003-03-06

Advanced technical ceramic. Ceramic composites. Methods of test for reinforcements-Determination of tensile properties of filaments at high temperature
先进的陶瓷技术 陶瓷复合材料 钢筋的试验方法 高温下长丝拉伸性能的测定

2008-01-31

Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature-Determination of interlaminar shear strength by short span bend test (three points)
高级技术陶瓷 室温下陶瓷复合材料的机械性能 通过短跨弯曲试验测定层间剪切强度（三点）

2003-02-28

Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties-Determination of self-loaded deformation
高级技术陶瓷 单片陶瓷的试验方法 热机械性能 自加载变形的测定

2003-04-22

Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens
高级工业陶瓷.室温下陶瓷复合材料的机械性能.第4部分:用缺口试样的压缩载荷测定层间剪切强度；德文版EN 658-4:2003

2003-05-01