Specification for copper-zinc-aluminium-nickel-silicon alloy tube
铜锌铝镍硅合金管规范

2014-11-30

BS 3B 27. Specification for copper-zinc-aluminium- nickel-silicon alloy tube
BS 3B 27 铜锌铝镍硅合金管规范

2009-04-29

Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金管规范（室温固溶处理和时效）（壁厚不超过10 mm）（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

1971-08-31

Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
镀铝铝铜镁硅锰合金（固溶处理和人工时效）精密公差薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）

2002-04-05

Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝涂层铝-铜-镁-硅-锰合金（室温固溶处理和时效）的精密薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）

2002-04-05

Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝铜镁硅锰合金板材规范（固溶处理、控制拉伸和沉淀处理）（Cu 4.4、Mg 0.5、Si 0.7、Mn 0.8）

1971-08-31

Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金（固溶处理和沉淀处理）的锻坯和锻件规范（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

1971-08-31

Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝涂层铝-铜-镁-硅-锰合金薄板和带材规范（固溶处理、冷加工以压扁并在室温下时效）（Cu 4.4、Mg 0.5、Si 0.8、Mn 0.8）

2002-04-05

Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝-铜-镁-硅-锰合金（固溶处理和人工时效）精密薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）

1978-11-30

Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金（室温固溶处理和时效）的锻坯和锻件规范（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

1971-08-31

Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝-铜-镁-硅-锰合金（室温固溶处理和时效）的精密薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）

1978-11-30

Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
铝镁硅锰合金管规范（固溶处理和沉淀处理）（壁厚不超过10mm）（适用于焊接）（Mg 0.8 Si 1 Mn 0.7）

1971-09-30

Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝铜镁硅锰合金棒材和挤压型材规范（固溶处理和人工时效）（直径不超过200mm或较小截面尺寸）（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

1978-12-29

Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
铝镁硅铜铬合金管规范（溶液处理和人工老化:液压试验）（厚度不超过10mm）（Mg 1.0 Si 0.6 Cu 0.28 Cr 0.2）

1975-05-30

Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
铝镁硅铜铬合金管规范（溶液处理和人工老化:未进行液压试验）（厚度不超过10mm）（Mg 1.0 Si 0.6 Cu 0.28 Cr 0.2）

1975-05-30

Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)
铝-铜-镁-硅-锰合金（固溶处理和自然时效条件下使用）（直径不超过10 mm）实心冷锻铆钉用线材规范（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）（2014A）

1990-01-31

Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金（固溶处理和沉淀处理）螺母、联轴器和空心机加工零件用六角棒规范（无周边和不对称粗晶）（平面宽度不小于14 mm 也不大于36 mm）（Cu 4.4 Mg 0.5

1971-08-31