STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR (SUPERSEDING MIL-S-1222H)
要求高可靠性应用的螺柱、螺栓、螺钉和螺母；通用技术条件（代替MIL-S-1222H）

2000-12-08

Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
耐热和高温应用的不锈钢和镍合金螺栓、六角带帽螺钉和双头螺栓的标准规范

2024-06-01

Harmonized detail specification for fixed aluminium electrolytic capacitors (long-life grade). Non-solid electrolyte. Cylindrical, polar insulated metallic case, clamp or stud mounting screw terminations. Full plus additional assessment level
固定铝电解电容器（长寿命级）协调详细规范 非固体电解质 圆柱形、极性绝缘金属外壳、夹具或螺柱安装螺钉终端 完整加额外评估级别

1981-03-15

Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm)
螺栓、螺柱、固定螺钉和螺母（Ni 25.5、Cr 15、Ti 2、Mn 1.5、Mo 1.25、Si 0.7、V 0.3）制造用高膨胀耐热钢筋和钢丝规范（极限截面50 mm）

2011-01-31

BS 2HR 650. Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Limiting ruling section 50 mm)
BS 2HR 650 螺栓、螺柱、固定螺钉和螺母（Ni 25.5、Cr 15、Ti 2、Mn 1.5、Mo 1.25、Si 0.7、V 0.3）制造用高膨胀耐热钢筋和钢丝规范（极限截面50 mm）

2010-11-24