NASA SSTD-8070-0017-WELD Rev.C-奥氏体不锈钢管/板的气体保护电弧焊-国家数字标准馆

现行 NASA SSTD-8070-0017-WELD Rev.C

到馆提醒

收藏跟踪

购买正版

Gas Tugsten ARC Welding of Austenitic Stainless Steel Pipe/Plate 奥氏体不锈钢管/板的气体保护电弧焊

发布日期： 2018-08-15

John C.Stennis航天中心（SSC）标准（SSTD）规定了合格的美国机械工程师学会（ASME）焊接程序，用于使用氩、氦或氮作为背衬气体，对壁厚为0.063英寸至1.500英寸的奥氏体不锈钢管或板进行钨极气体保护焊（GTAW）。

This John C. Stennis Space Center (SSC) Standard (SSTD) provides for a qualified American Society of Mechanical Engineers (ASME) weld procedure for Gas Tungsten Arc Welding (GTAW) of austenitic stainless steel pipe or plate from 0.063-inch to 1.500-inch wall thickness using argon, helium, or nitrogen as a backing gas.

分类信息

发布单位或类别：美国-美国宇航局

关联关系

研制信息

相似标准/计划/法规

JIS Z 3327-2013

Austenitic stainless steel rods and wires of tungsten inert gas arc welding for cryogenic service
低温用奥氏体不锈钢钨极惰性气体保护焊棒和焊丝

GB/T 21832.3-2024

奥氏体-铁素体型双相不锈钢焊接钢管第3部分：油气输送用管
Welded austenitic-ferritic(duplex) stainless steel tubes and pipes—Part 3: Pipes for oil and gas transmission

AWS B2.1.006-90

Standard Welding Procedure Specification for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M8 or P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下10至18号（M-1至M8或P-8）带或不带衬垫的碳钢与奥氏体不锈钢的气体保护金属极电弧焊标准焊接工艺规范

AWS B2.1-8-009-2002(R2013)

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号奥氏体不锈钢（M-8、P-8或S-8）带或不带衬垫的钨极气体保护焊标准焊接工艺规范（Swps）

AWS B2.1-8-214-2001(R2012)

Standard Welding Procedure Spec (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS）厚 ER3XX ER3XX-XX 焊接状态主要用于管道应用

1A1W1S1 Archive Product 37

Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
焊接状态下1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范

AWS B2.1-8-216-2001(R2012)

Gas Tungsten Arc Welding With Consumable Insert Root Followed by Shieded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications
焊接状态下 1/8至1-1/2英寸厚、IN3XX和ER3XX的奥氏体不锈钢（M-8/P-8/S-8 第1组）的自耗镶块根部钨极气体保护焊然后进行屏蔽金属极电弧焊主要用于管道应用

AWS B2.1-8-212-2001(R2012)

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的钨极气体保护焊标准焊接工艺规范（WPS）厚 ER3XX 焊接状态主要用于管道应用

AWS B2.1-1/8-010-2015

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1), to Austenitic Stainless Steel (M-8/P-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号规格的碳钢（M-1/P-1）至奥氏体不锈钢（M-8/P-8）的钨极气体保护焊标准焊接工艺规范（SWPS）带或不带衬垫

1A1W1S1 Archive Product 36

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
1/8至1-1/2英寸厚的焊态奥氏体不锈钢（M-8/P-8/S-8 第1组）的钨极气体保护焊标准焊接工艺规范

AWS B2.1-8-215-2001(R2012)

Gas Tungsten Arc Welding With Consumable Insert Root of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）自耗镶块根部的钨极气体保护焊 IN3XX和ER3XX 焊接状态主要用于管道应用

AWS B2.1-8-005-2002(R2013)

Standard Welding Procedure Specification (Swps) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
18至10号奥氏体不锈钢（M-8、P-8或S-8）焊态气体保护焊（短路过渡模式）标准焊接工艺规范（Swps）带或不带衬垫

1A1W1S1 Archive Product 138

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1, P-1 or S-1 to M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
碳钢与奥氏体不锈钢（M-1、P-1或S-1至M-8、P-8或S-8）在焊态条件下18至10 Gauge（带或不带衬垫）的钨极气体保护焊标准焊接工艺规范（Swps）

AWS B2.1-1/8-006-2002(R2013)

Standard Welding Procedure Specification (Swps) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
在焊态条件下带或不带衬垫的18至10 Gauge碳钢至奥氏体不锈钢（M-1至M-8、P-8或S-8）的气体保护金属极电弧焊（短路过渡模式）标准焊接工艺规范（Swps）

1A1W1S1 Archive Product 457

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
1/8英寸[3 mm]至1-1/2英寸[38 mm]厚、MIL-3XX、焊态主要用于海军应用的奥氏体不锈钢（S-8）钨极气体保护焊的海军应用标准焊接工艺规范（SWPS-N）

AWS B2.1-8-308-2016

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Plate and Structural Naval Applications
1/8英寸[3毫米]至1-1/2英寸[38毫米]厚的MIL-3XX奥氏体不锈钢（S-8）焊态钨极气体保护焊海军应用标准焊接工艺规范（SWPS-N）主要用于板材和结构海军应用

AWS B2.1-1/8-229-2002-AMD1(R2013)

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH
碳钢（M-1/P-1/S-1 第1组或第2组）与奥氏体不锈钢（M-8/P-8/S-8 第1组） 1/8至1-1/2英寸的气体保护金属极电弧焊后的钨极气体保护焊标准焊接工艺规范（SWPS）

AWS B2.1-1/8-227-2002-AMD1(R2013)

STANDARD WELDING PROCEDURE SPECIFICATION(WPS) FOR; GAS TUNGSTEN ARC WELDISTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, ER309(L), AS-WELDED
标准焊接工艺规范（WPS）；钨极气体保护焊1/16至1-1/2英寸厚ER309（L）焊态奥氏体不锈钢（M-8/P-8/S-8 1组）与碳钢（M-1/P-1/S-1 1或2组）的钨极气体保护焊标准焊接工艺规范（SWPS）

AWS B2.1-8-213-1997(R2012)

Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（WPS）厚 ER3XX-XX 焊接状态主要用于管道应用

1A1W1S1 Archive Product 517

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N）在焊接状态下采用1/8英寸[3 mm]至1-1/2英寸[38 mm]厚的MIL-3XX奥氏体不锈钢（S-8）自耗镶块根部进行钨极气体保护焊主要用于海军应用的管道

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统