AWS B2.1-8-005:2002(R2013)-18至10号奥氏体不锈钢（M-8、P-8或S-8）焊态气体保护焊（短路过渡模式）标准焊接工艺规范（Swps）带或不带衬垫-国家数字标准馆

现行 AWS B2.1-8-005:2002(R2013)

到馆提醒

收藏跟踪

购买正版

Standard Welding Procedure Specification (Swps) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing 18至10号奥氏体不锈钢（M-8、P-8或S-8）焊态气体保护焊（短路过渡模式）标准焊接工艺规范（Swps）带或不带衬垫

发布日期： 2002-01-01

本标准包含使用半自动气体保护焊（短路过渡模式）焊接18至10 Ga厚度范围内奥氏体不锈钢的基本焊接变量。它列举了制作焊件所需的母材和操作条件、填充金属规范以及角焊缝和坡口焊缝的允许接头设计。

This standard contains the essential welding variables for welding austenitic stainless steel in the thickness range of 18 through 10 gauge, using semiautomatic gas metal arc welding (short circuiting transfer mode). It cites the base metals and operating conditions necessary to make the weldment, the filler metal specifications, and the allowable joint designs for fillet welds and groove welds.

分类信息

发布单位或类别：美国-美国焊接协会

关联关系

研制信息

相似标准/计划/法规

BS EN ISO 15614-1-2017+A1-2019

Specification and qualification of welding procedures for metallic materials. Welding procedure test-Arc and gas welding of steels and arc welding of nickel and nickel alloys
金属材料焊接程序的规范和鉴定焊接工艺试验

钨极惰性气体保护焊工艺方法
Welding procedure specification for gas tungsten arc welding

BS EN ISO 15609-1-2019

Specification and qualification of welding procedures for metallic materials. Welding procedure specification-Arc welding
金属材料焊接程序的规范和鉴定焊接工艺规程

JIS Z 3421-1-2003

Specification and approval of welding procedures for metallic materials -- Welding procedure specification for arc welding
金属材料焊接工艺规程和批准电弧焊焊接工艺规程

AWS B2.1-1-007-2002(R2013)

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Galvanized Steel (M-1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号镀锌钢（M-1）带或不带衬垫的钨极气体保护焊标准焊接工艺规范（Swps）

AWS B2.1-1-011-2002(R2013)

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Galvanized Steel (M-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下10至18号镀锌钢（M-1）带或不带衬垫的保护金属极电弧焊标准焊接工艺规范（Swps）

1A1W1S1 Archive Product 133

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Galvanized Steel (M-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下10至18号镀锌钢（M-1）带或不带衬垫的保护金属极电弧焊标准焊接工艺规范（Swps）

BS EN ISO 15614-6-2006

Specification and qualification of welding procedures for metallic materials. Welding procedure test-Arc and gas welding of copper and its alloys
金属材料焊接程序的规范和鉴定焊接工艺试验

KS B ISO 15614-1

금속재료 용접절차의 시방과 자격인정 — 용접절차시험 — 제1부: 강의 아크 및가스 용접과 니켈과 니켈합금의 아크 용접
金属材料焊接程序规范和资格 - 焊接程序试验 - 第1部分:镍和镍合金的钢和电弧焊接的电弧和气体焊接

KS B ISO 15614-1

금속재료 용접절차의 시방과 자격인정 — 용접절차 시험 — 제1부: 강의 아크 용접과 가스 용접 및 니켈과 니켈합금의 아크 용접
金属材料焊接工艺规范和评定焊接工艺试验第1部分:钢的电弧焊和气焊以及镍和镍合金的电弧焊

GOST R ISO 15614-1-2009

Технические требования и аттестация процедур сварки металлических материалов. Проверка процедуры сварки. Часть 1. Дуговая и газовая сварка сталей и дуговая сварка никеля и никелевых сплавов
金属材料焊接程序的规格和资格焊接程序试验第1部分:电弧和气体焊接镍和镍合金的钢和电弧焊

ISO 15614-1-2017

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
金属材料焊接程序的规范和资格 - 焊接程序试验 - 第1部分:镍和镍合金钢和弧焊的弧焊和气焊

AWS B2.1-1-003-2002(R2013)

Standard Welding Procedure Specification (Swps) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Galvanized Steel (M-1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号镀锌钢（M-1）气体保护金属极电弧焊（短路过渡模式）的标准焊接工艺规范（Swps）带或不带衬垫

1A1W1S1 Archive Product 127

Standard Welding Procedure Specification (Swps) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Galvanized Steel (M-1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号镀锌钢（M-1）气体保护金属极电弧焊（短路过渡模式）的标准焊接工艺规范（Swps）带或不带衬垫

KS B ISO 15609-1

금속재료 용접절차의 시방과 자격인정 — 용접절차시방서 — 제1부: 아크 용접
金属材料焊接程序的规范和资格 - 焊接程序规范 - 第1部分:电弧焊接

KS B ISO 15609-1

금속재료 용접절차의 시방과 자격인정 — 용접절차시방서 — 제1부: 아크 용접
金属材料焊接工艺规范和评定焊接工艺规范第1部分:电弧焊

ISO 15609-1-2019

Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding
金属材料焊接工艺规范和鉴定焊接工艺规范第1部分:电弧焊接

BS EN ISO 15609-6-2013

Specification and qualification of welding procedures for metallic materials. Welding procedure specification-Laser-arc hybrid welding
金属材料焊接程序的规范和鉴定焊接工艺规程

GOST R ISO 15609-1-2009

Технические требования и аттестация процедур сварки металлических материалов. Технические требования к процедуре сварки. Часть 1. Дуговая сварка
金属材料焊接程序的规格和资格焊接程序规范电弧焊

BS EN ISO 15609-2-2019

Specification and qualification of welding procedures for metallic materials. Welding procedure specification-Gas welding
金属材料焊接程序的规范和鉴定焊接工艺规程

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统