BS 7000-2:2015给出了管理所有类型管道设计的指南 制成品。它涉及设计过程的每个阶段，从 从产品概念到交付、使用和报废处理。注1:本标准承认小型企业或专门从事 一次性产品或特殊用途的报废设备通常需要适应 过程，以适应他们的操作方法。它适用于从董事会到董事会的所有相关管理层 个人项目层面，参与项目设计的所有类型的组织 制成品。本手册提供了应用一般原理和技术的指南 管理设计，提高对管理问题和 强调对产品设计采取综合方法的必要性。本标准无意定义设计技术。 注2:对于许多产品，尤其是那些复杂的产品，集成 设计需要多学科的方法。建议提交的文件 参考书目中列出了有关一般管理技术的指南。 创新、服务设计和建设管理指南 设计分别在BS 7000-1、BS 7000-3和BS 7000-4中给出。注3:关于满足法定要求所需程序的指南，例如 健康和安全，或产品认证和责任，不打算 综合的在适当的情况下，需要参考其他文件。注4:本标准旨在补充BS EN ISO 9001。交叉引用:BS 7000-10:2008BS 8887-1BS 8887-2BS 8887-211BS 8887-220BS 8887-240BS ISO 10007BS 6079-3BS 7000-1BS 7000-3BS 7000-4BS 7373-2BS EN 61160BS EN ISO 9001BS EN ISO 14001BS ISO 9000-2BS IEC 62198环境保护法1990购买本文件时提供的所有现行修订。

BS 7000-2:2015 gives guidance on managing the design of all types of manufactured products. It deals with every stage of the design process from product concept through to delivery, use and end-of-life processing.NOTE 1 This standard recognizes that small enterprises or those specializing in one-off products or special purpose end-of-life equipment often need to adapt the process to suit their method of operation.It is intended for use by all relevant levels of management, from board level to individual project level, in all types of organizations involved in the design of manufactured products.Guidance is given on the application of general principles and techniques to the management of design, raising awareness of management issues and emphasizing the need for an integrated approach to the design of products.This standard is not intended to define design techniques.NOTE 2 For many products, particularly those that are complex, an integrated multi-disciplinary approach to design is needed. Documents recommended for guidance on general management techniques are listed in the Bibliography. Guidance on the management of innovation, service design and construction design is given in BS 7000-1, BS 7000-3 and BS 7000-4 respectively.NOTE 3 Guidance on procedures needed to meet statutory requirements, such as health and safety, or product certification and liability, is not intended to be comprehensive. Reference needs to be made to other documents where appropriate.NOTE 4 This standard is intended to complement BS EN ISO 9001.Cross References:BS 7000-10:2008BS 8887-1BS 8887-2BS 8887-211BS 8887-220BS 8887-240BS ISO 10007BS 6079-3BS 7000-1BS 7000-3BS 7000-4BS 7373-2BS EN 61160BS EN ISO 9001BS EN ISO 14001BS ISO 9000-2BS IEC 62198Environmental Protection Act 1990All current amendments available at time of purchase are included with the purchase of this document.