本文件规定了由非合金优质钢制成的具有规定室温性能的圆形截面电焊和埋弧焊管的TR1和TR2质量的交货技术条件。注1:质量TR2旨在支持欧盟指令2014\/68\/EU关于具有规定室温特性的压力设备的基本要求（见表5）。注2:一旦本标准在《欧盟官方公报》（OJEU）上发布，符合指令2014\/68\/EU基本安全要求（ESR）的假设仅限于本标准中材料的技术数据，不假设材料适用于特定压力设备。因此，需要由压力设备的设计者或制造商根据特定设备项目的设计要求对本材料标准中规定的技术数据进行评估，以验证是否满足压力设备指令的ESRs，同时考虑到任何后续处理可能影响基材性能的程序。

This document specifies the technical delivery conditions for qualities TR1 and TR2 of electric welded and submerged arc welded tubes of circular cross section, with specified room temperature properties, made from non-alloy quality steel. NOTE 1 Quality TR2 is intended to support the essential requirements of EU Directive 2014/68/EU in respect of pressure equipment with specified room temperature properties (see Table 5). NOTE 2 Once this standard is published in the Official Journal of the European Union (OJEU), presumption of conformity to the Essential Safety Requirements (ESR) of Directive 2014/68/EU is limited to the technical data for the materials in this standard and does not presume adequacy of the material for a specific item of pressure equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of a specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done by the designer or manufacturer of the pressure equipment, taking also into account any subsequent processing procedures which may affect properties of the base materials.