BS EN 124-1:2015适用于具有净开口（包括1000 mm）的人孔顶部和集水沟顶部，用于覆盖安装在行人和/或车辆通行区域的集水沟、人孔和检查室。根据EN 124-2，规定了集水沟顶部和人孔顶部的定义、分类、一般设计原则、性能要求和试验方法，适用于铸铁制集水沟顶部和人孔顶部；EN 124-3，用于钢或铝合金制成的集水沟顶部和人孔顶部；EN 124-4，适用于由钢筋混凝土制成的集水沟顶部和人孔顶部； EN 124-5，适用于复合材料制成的集水沟顶部和人孔顶部；EN 124-6，用于聚丙烯（PP）、聚乙烯（PE）或未增塑聚氯乙烯（PVC-U）制成的集水沟顶部和人孔顶部。第1部分仅与标准EN 124-2、EN 124-3、EN 124-4、EN 124-5和EN 124-6中的至少一个结合使用，每个标准都将第1部分作为一个整体部分。本欧洲标准不适用于:作为EN 1433规定的预制排水沟一部分的格栅/盖板、EN 1253（所有部分）规定的建筑物地面和屋顶集水沟、地面排水箱。 交叉引用:EN 124-2:2015EN 124-3:2015EN 124-4:2015EN 124-5:2015EN 124-6:2015EN 206:2013EN 13036-4EN ISO 868ISO 868EN ISO 7500-1:2004ISO 7500-1:2004EN 1253EN 1433EN 16323以及BS EN 124-2:2015、BS EN 124-3:2015、BS EN 124-4:2015、BS EN 124-5:2015和BS EN 124-6:2015，本文件取代了BS EN 124:1994，该标准已被撤销。购买本文件时，所有现行修订均包含在购买本文件中。

BS EN 124-1:2015 is applicable to manhole tops and gully tops with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers installed in areas subjected to pedestrian and/or vehicular traffic. It specifies definitions, classification, general principles of design, performance requirements and test methods for gully tops and manhole tops according to:EN 124-2, for gully tops and manhole tops made of cast iron;EN 124-3, for gully tops and manhole tops made of steel or aluminium alloys;EN 124-4, for gully tops and manhole tops made of steel reinforced concrete;EN 124-5, for gully tops and manhole tops made of composite materials;EN 124-6, for gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U). Part 1 is only applicable in combination with at least one of the standards EN 124-2, EN 124-3, EN 124-4, EN 124-5 and EN 124-6 each of which has this Part 1 as an integral part.This European Standard is not applicable to:gratings/covers as part of prefabricated drainage channels according to EN 1433,floor and roof gullies in buildings which are specified in EN 1253 (all parts),surface boxes.Cross References:EN 124-2:2015EN 124-3:2015EN 124-4:2015EN 124-5:2015EN 124-6:2015EN 206:2013EN 13036-4EN ISO 868ISO 868EN ISO 7500-1:2004ISO 7500-1:2004EN 1253EN 1433EN 16323Together with BS EN 124-2:2015, BS EN 124-3:2015, BS EN 124-4:2015, BS EN 124-5:2015 and BS EN 124-6:2015, it supersedes BS EN 124:1994 which is withdrawnAll current amendments available at time of purchase are included with the purchase of this document.