BS EN 14303:2015规定了工厂制矿棉产品的要求，这些产品包括: 用于建筑设备和工业装置的隔热，具有操作性 温度范围约为0°C至+800°C。低于环境工作温度，采取特殊措施防止水蒸气扩散和水污染 可能需要通过气流进行积聚。在-50°C的工作温度以下进行特殊测试 关于产品在预期用途中的适用性，建议（例如，液化 氧气）。在任何情况下都应注意制造商的建议。产品以卷、板、板的形式制造，有或没有表面或涂层， 采购产品垫子，毛毡，被子，有线垫子，薄片垫子，斜边滞后和管道部分。本欧洲标准描述了产品特性，包括测试程序， 合格性、标记和评价。 本标准涵盖的产品也用于预制隔热系统和 复合板；不包括包含这些产品的系统的性能。本欧洲标准未规定应达到的给定财产的要求水平 通过一种产品来证明其在特定应用中的适用性。测试所需的水平 给定的应用可以在法规和招标书中找到。在10°C下，宣称导热系数大于0065 W/（m·K）的产品不包括在 这个标准。本欧洲标准不包括现场保温（吹扫或浇注）产品或其他产品 用于建筑结构的隔热。本欧洲标准不包括以下声学方面:直接空气传播声音 绝缘和冲击噪声传递指数。交叉引用:EN 822EN 823EN 824EN 826EN 1604EN 1609EN 12086: 2013EN 1263EN 12667EN 12667EN 12667EN 12939EN 13172:2012EN 13162EN 1362EN 13467EN 13468EN 13469EN 13469EN 13472EN 13472EN 13501-1:2007+A1:2009EN 132009EN 13820EN 13820EN 13823EN 14706EN 14707EN 1571EN 1571EN 15715:2009EN ISO 354EN ISO 354EN ISO 354EN ISO 1182ISO 354ISO 1182ISO 354ISO 1182EN 1382EN ISO 1716ISO 1716ISO 171616 8497ISO 8497ISO 8497EN ISO 9229:2007ISO 9229:20077EN 9229:2007EN EN 11925-2EN ISO 13787ISO 13787EN 825EN 1602EN 13238EN13470EN 29052-1EN 29053ISO 9053EN ISO 23993ISO 23993ISO 65第305/2011号法规（欧盟）购买本文件时提供的所有现行修订均包含在购买本文件中。

BS EN 14303:2015 specifies the requirements for factory made mineral wool products, which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately 0 °C to + 800 °C.Below an operating temperature of ambient, special means against water vapour diffusion and water accumulation by air flow might be required. Below an operating temperature of - 50 °C, special tests regarding the suitability of the products in the intended application are advised (e.g. liquefaction of oxygen). Manufacturer's advice should be heeded in all cases.The products are manufactured with or without facings or coatings, in the form of rolls, boards, slabs, mats, felts, quilts, wired mats, lamella mats, bevelled lags and pipe sections.This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.Products with a declared thermal conductivity greater than 0,065 W/(m·K) at 10 °C are not covered by this standard.This European Standard does not cover products for in situ insulation (blowing or pouring) or products for the insulation of the building structure.This European Standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index.Cross References:EN 822EN 823EN 824EN 826EN 1604EN 1609EN 12086:2013EN 12667EN 12939EN 13172:2012EN 13162EN 13467EN 13468EN 13469EN 13472EN 13501-1:2007+A1:2009EN 13820EN 13823EN 14706EN 14707EN 15715EN ISO 1182ISO 1182EN ISO 1716EN 15715:2009EN ISO 354EN ISO 1182ISO 354ISO 1182EN ISO 1716ISO 1716EN ISO 8497ISO 8497EN ISO 9229:2007ISO 9229:2007EN ISO 10456ISO 10456EN ISO 11654ISO 11654EN ISO 11925-2ISO 11925-2EN ISO 13787ISO 13787EN 825EN 1602EN 13238EN 13470EN 29052-1EN 29053ISO 9053EN ISO 23993ISO 23993ISO 65Regulation (EU) No. 305/2011All current amendments available at time of purchase are included with the purchase of this document.