Aerospace series - Rivet, 100 degrees reduced countersunk head, close tolerance - Inch series
航空航天系列.紧公差100度缩径沉头铆钉.英制系列

2020-03-30

Aerospace — Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；100度缩径沉头螺钉 内偏置十字肋或无肋驱动 标准柄 短或中长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa——尺寸

2008-08-18

Aerospace series. Screws 100 degrees countersunk normal head, offset cruciform recess, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235 degreesC (prEN 4079)
航空航天系列 镀镉合金钢制100度标准沉头十字槽螺钉 分类:900兆帕（环境温度）/235摄氏度（prEN 4079）

1993-12-13

EN 4636. Aerospace series. Screws, 100 degrees countersunk head, six lobes recess, short thread, in titanium alloy TI-P64001, MoS2 coated. Classification.100 MPa (at ambient temperature) / 315 degreesC
EN 4636 航空航天系列 钛合金TI-P64001制 MoS2涂层 短螺纹 六瓣凹槽100度沉头螺钉 分类100兆帕（环境温度）/315摄氏度

2006-02-06

Aerospace — Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；100°标准沉头螺钉 内偏置十字肋或无肋传动 标准柄 短或中长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa——尺寸

2008-08-18

BS EN 4634. Aerospace series. Screw, 100 degrees countersunk head, six lobes recess, short thread, in steel FE-PA2601, passivated. Classification: 900MPa (at ambient temperature 650 degreesC)
英国标准EN 4634 航空航天系列 钝化FE-PA2601钢制短螺纹六瓣凹槽100度沉头螺钉 分类:900MPa（环境温度650摄氏度）

2007-05-02

BS EN 4636. Aerospace series. Screws, 100 degrees countersunk head, six lobes recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating. Classification: 1 100 MPa (at ambient temperature)/ 315 degreesC
英国标准EN 4636 航空航天系列 钛合金TI-P64001制短螺纹六凸角凹头100度沉头螺钉 铝涂层 分类:1100兆帕（环境温度）/315摄氏度

2007-05-02

Aerospace. Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天100°标准沉头螺钉 内偏置十字肋或无肋驱动 标准柄 短或中长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa 尺寸

2008-09-30

EN 4634. Aerospace series. Screws, 100 degrees countersunk head, six lobes recess, short thread, in heat resisting steel FE-PA2601, passivated. Classification. 900 MPa (at ambient temperature) / 650 degreesC
EN 4634 航空航天系列 钝化耐高温钢FE-PA2601制短螺纹六角凹头100度沉头螺钉 分类900兆帕（环境温度）/650摄氏度

2006-02-06

AEROSPACE SERIES. SCREWS, 100º COUNTERSUNK REDUCED HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 ºC.
航空航天系列 镀镉合金钢制短螺纹紧公差标准杆偏置十字槽100º沉头异径头螺钉 分类:1100兆帕（环境温度）/235ºC

1997-03-14

항공우주－100° 일반 접시머리 나사, 일반 섕크, 리브가 있는 내부 오프셋 십자형 드라이브, 강도 등급 1 100 MPa 이하,코팅한 또는 코팅하지 않은 금속재, 짧거나 중간 길이 MJ 나사－치수
航空航天－强度等级小于或等于1100兆帕的有涂层或无涂层金属材料短或中长MJ螺纹标准柄内偏置十字肋传动100°标准沉头螺钉－尺寸

2009-12-30

AEROSPACE SERIES. SCREWS, 100º COUNTERSUNK REDUCED HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION: 1 100 MPA (AT AMBIENT EMPERATURE)/315 ºC.
航空航天系列 钛合金制 阳极氧化 MOS2润滑 100º沉头缩径螺钉 偏置十字槽 紧公差标准杆 短螺纹 分类:1100 MPA（环境温度）/315ºC

1997-03-14

Aerospace series. Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 °C
航空航天系列 钛合金制短螺纹紧公差标准杆斜十字槽100°沉头缩径螺钉阳极氧化铝涂层 分类:1100兆帕（环境温度）/315摄氏度

2009-03-31

EN 4635. Aerospace series. Screws, 100 degrees countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification. 1 270 MPa (at ambient temperature) / 600 degreesC
EN 4635 航空航天系列 耐高温镍基合金NI-PH2601（Inconel 718）制短螺纹六凸角凹头100度沉头螺钉 分类1270MPa（环境温度）/600摄氏度

2006-02-06

Aerospace series. Screws 100 degrees countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/425 degreesC (prEN 4072)
航空航天系列 螺钉100度沉头标准头 偏置十字槽 紧公差标准杆 短螺纹 钛合金制 铝IVD涂层 分类:1100兆帕（环境温度）/425摄氏度（prEN 4072）

1993-11-18

BS EN 4635. Aerospace series. Screws, 100 degrees countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1 270 MPa (at ambient temperature) / 650 degreesC
英国标准EN 4635 航空航天系列 耐高温镍基合金NI-PH2601（Inconel 718）制短螺纹六凸角凹头100度沉头螺钉 分类:1270MPa（环境温度）/650摄氏度

2007-05-02