KS W ISO 5856-2009(2019)-航空航天－强度等级小于或等于1100兆帕的有涂层或无涂层金属材料短或中长MJ螺纹标准柄内偏置十字肋传动100°标准沉头螺钉－尺寸 -国家数字标准馆

现行 KS W ISO 5856-2009(2019)

到馆提醒

收藏跟踪

购买正版

항공우주－100° 일반 접시머리 나사, 일반 섕크, 리브가 있는 내부 오프셋 십자형 드라이브, 강도 등급 1 100 MPa 이하,코팅한 또는 코팅하지 않은 금속재, 짧거나 중간 길이 MJ 나사－치수 航空航天－强度等级小于或等于1100兆帕的有涂层或无涂层金属材料短或中长MJ螺纹标准柄内偏置十字肋传动100°标准沉头螺钉－尺寸

发布日期： 2009-12-30

该标准规定了为航空航天相关部件标准化工作而制定的、强度等级在1100 MPa以下、涂层的还有未涂层的金属材料、短或中长MJ螺钉、普通螺栓、带筋的内偏移十字形螺钉、100°普通盘头螺钉的尺寸。这旨在提高航空航天产品标准。

이 표준은 항공우주 관련 부품의 표준화 작업을 위하여 제정한, 강도 등급 1 100MPa 이하, 코팅한 또 는 코팅하지 않은 금속재, 짧거나 중간 길이 MJ 나사, 일반 섕크, 리브가 있는 내부 오프셋 십자형 드라 이브, 100 ° 일반 접시머리 나사의 치수를 규정한다. 이것은 항공우주 제품 표준을 끌어올리는데 목적이 있다.

分类信息

发布单位或类别：韩国-韩国标准

关联关系

研制信息

相似标准/计划/法规

BS EN 4163-2016

Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C
航空航天系列螺钉100？沉头标准头偏置十字槽粗公差标准杆长螺纹合金钢制镀镉分类:1100兆帕（环境温度）/235摄氏度

Aerospace — Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；100°标准沉头螺钉内偏置十字肋或无肋传动标准柄短或中长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

BS EN 4162-2016/AC-2017

Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
航空航天系列.镀镉合金钢制中长螺纹粗公差标准杆偏置十字槽100°沉头标准头螺钉.等级:1100 MPa（环境温度）/235°C

UNE-EN 3760-1997

AEROSPACE SERIES. SCREWS, 100º COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 ºC.
航空航天系列钝化耐热耐腐蚀钢制100º标准沉头偏置十字槽螺钉分类:1100兆帕（环境温度）/425ºC

UNE-EN 3306-1997

AEROSPACE SERIES. SCREWS, 100º COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 ºC.
航空航天系列钛合金制阳极氧化MOS2润滑偏置十字槽100º沉头普通螺钉分类:1100兆帕（环境温度）/315ºC

BS 93/717457 DC

Aerospace series. Screws 100 degrees countersunk normal head, offset cruciform recess, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235 degreesC (prEN 4079)
航空航天系列镀镉合金钢制100度标准沉头十字槽螺钉分类:900兆帕（环境温度）/235摄氏度（prEN 4079）

BS ISO 5856-2008

Aerospace. Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天100°标准沉头螺钉内偏置十字肋或无肋驱动标准柄短或中长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

BS EN 3760-1997

Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425°C
钝化耐热耐腐蚀钢制100度沉头普通十字槽螺钉分类:1100兆帕（环境温度）/425摄氏度

UNE-EN 3381-1997

AEROSPACE SERIES. SCREWS, 100º COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM, ANIZED, MOS2 LUBRICATED. CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 ºC.
航空航天系列钛制短螺纹紧公差标准杆偏置十字槽100º沉头标准头螺钉分类:1100兆帕（环境温度）/315ºC

UNE-EN 3035-1997

AEROSPACE SERIES. SCREWS, 100º COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED, CLASSIFICACION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 ºC.
航空航天系列合金钢制短螺纹紧公差标准杆斜十字槽100º沉头标准头螺钉镀镉等级:1100 MPA（环境温度）/235ºC

BS EN 4072-2016

Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa (at ambient temperature) / 425 °C
航空航天系列螺钉 100？沉头标准头偏置十字槽紧公差柄钛合金短螺纹铝IVD涂层分类:1100兆帕（环境温度）/425摄氏度

Aerospace — Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；100度缩径沉头螺钉内偏置十字肋或无肋驱动标准柄短或中长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

BS EN 4496-2005

Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 °C
航空航天系列螺钉 100？沉头标准头偏置十字槽紧公差标准柄短螺纹钛合金制阳极氧化铝着色涂层分类:1100兆帕（环境温度）/315摄氏度

UNE-EN 3543-1997

AEROSPACE SERIES. SCREWS, 100º COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 ºC.
航空航天系列钝化耐热耐腐蚀钢制短螺纹紧公差标准杆偏置十字槽100º沉头标准头螺钉分类:1100兆帕（环境温度）/425ºC

BS EN 3035-1997

Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
镀镉合金钢制短螺纹紧公差标准杆偏置十字槽100度沉头标准头螺钉分类:1100兆帕（环境温度）/235摄氏度

BS 93/715850 DC

Aerospace series. Screws 100 degrees countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/425 degreesC (prEN 4072)
航空航天系列螺钉100度沉头标准头偏置十字槽紧公差标准杆短螺纹钛合金制铝IVD涂层分类:1100兆帕（环境温度）/425摄氏度（prEN 4072）

BS ISO 13921-2008

Aerospace. Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天100度缩径沉头螺钉内偏置十字肋或无肋驱动标准柄短或中长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

BS EN 3543-1997

Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425°C
钝化耐热耐腐蚀钢制短螺纹紧公差标准杆偏置十字槽100度沉头标准头螺钉分类:1100兆帕（环境温度）/425摄氏度

BS EN 4509-2006

Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature)/315°C
公制系列阳极氧化钛合金制100°标准沉头偏置十字槽螺钉分类:1100兆帕（环境温度）/315摄氏度

BS EN 3306-1996

Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS₂ lubricated. Classification. 1100 MPa (at ambient temperature)/315°C
钛合金阳极氧化MoS₂润滑的偏置十字槽100°标准沉头螺钉分类1100兆帕（环境温度）/315摄氏度

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统