BS EN 62282-3-200:2016涵盖了固定燃料的运行和环境方面 电池电源系统性能。试验方法如下:规定运行和瞬态条件下的功率输出；规定运行条件下的电气和热回收效率；环境特征；例如，废气排放、噪音等 规定的操作和瞬态条件。本标准不涵盖电磁兼容性（EMC）。 本标准不适用于小型固定式燃料电池电力系统 IEC 62282-3-201规定的小于10千瓦的输出功率。燃料电池动力系统可能有不同的子系统，具体取决于燃料电池和燃料电池的类型 它们有不同的材料和能量流进出。 然而，已经定义了一个通用系统图和边界，用于评估 燃料电池动力系统（见图1）。为了确定燃油的系统边界，需要考虑以下条件 电池电源系统:所有能量回收系统均包含在系统边界内；在系统边界之外考虑各种电能储存装置；计算输入燃料的热值（如天然气、丙烷气和 纯氢气等）基于燃料边界处的燃料条件 电池电源系统。交叉引用:IEC 60051IEC 60359IEC 60688IEC 61000-4-7IEC 61000-4-13IEC 61028IEC 61143IEC 61672-1IEC 61672- 2.6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 6 6 6 6 6 6 3 3 ISO 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 3 3 3 ISO 363 3 3 3 3 3 3 3 3 ISO 363 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 ISO 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 ISO 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 ISO ISO 414141414141414161028EN 61143EN 61672-1EN61672-2EN 50470-1EN 62053-22EN 62282-3-201EN ISO 3744EN ISO 5167EN ISO 6326EN ISO 6974EN ISO 6975EN ISO 10101EN ISO 10523EN ISO 11541IEC 60050IEC 60050- 151IEC 60050-300IEC TS 62282-1:2013ISO 9000ISO 10780ISO 11086ISO 14687-3ISO 6976:1995ASME PTC 50EN ISO 9000EN ISO 6976:2005取代BS EN 62282-3-200:2012，该标准仍然有效。购买本文件时可获得的所有当前修订均包含在购买本文件中。

BS EN 62282-3-200:2016 covers operational and environmental aspects of the stationary fuel cell power systems performance. The test methods apply as follows:power output under specified operating and transient conditions;electrical and heat recovery efficiency under specified operating conditions;environmental characteristics; for example, exhaust gas emissions, noise, etc. under specified operating and transient conditions.This standard does not provide coverage for electromagnetic compatibility (EMC).This standard does not apply to small stationary fuel cell power systems with electric power output of less than 10 kW which are dealt with IEC 62282-3-201.Fuel cell power systems may have different subsystems depending upon types of fuel cell and applications, and they have different streams of material and energy into and out of them. However, a common system diagram and boundary has been defined for evaluation of the fuel cell power system (see Figure 1).The following conditions are considered in order to determine the system boundary of the fuel cell power system:all energy recovery systems are included within the system boundary;all kinds of electric energy storage devices are considered outside the system boundary;calculation of the heating value of the input fuel (such as natural gas, propane gas and pure hydrogen gas, etc.) is based on the conditions of the fuel at the boundary of the fuel cell power system.Cross References:IEC 60051IEC 60359IEC 60688IEC 61000-4-7IEC 61000-4-13IEC 61028IEC 61143IEC 61672-1IEC 61672-2IEC 62052-11IEC 62053-22IEC 62282-3-201ISO/IEC Guide 98-3ISO 3648ISO 3744ISO 4677-1ISO 4677-2ISO 5167ISO 5348ISO 5815-2ISO 6060ISO 6326ISO 6974ISO 6975ISO 7934ISO 7935ISO 8217ISO 10101ISO 10396ISO 10523ISO 10849ISO 11042-1ISO 11042-2ISO 11541ISO 11564ISO 11632ISO 14687-1ISO/TR 15916ISO 16622ASTM D4809ASTM F2602EN 60051EN 60359EN 60688EN 61000-4-7EN 61000-4-13EN 61028EN 61143EN 61672-1EN 61672-2EN 50470-1EN 62053-22EN 62282-3-201EN ISO 3744EN ISO 5167EN ISO 6326EN ISO 6974EN ISO 6975EN ISO 10101EN ISO 10523EN ISO 11541IEC 60050IEC 60050-151IEC 60050-300IEC TS 62282-1:2013ISO 9000ISO 10780ISO 11086ISO 14687-3ISO 6976:1995ASME PTC 50EN ISO 9000EN ISO 6976:2005Replaces BS EN 62282-3-200:2012 which remains current.All current amendments available at time of purchase are included with the purchase of this document.