IEC 62282-3-201:2017提供了满足以下标准的小型固定式燃料电池动力系统的电气、热和环境性能的测试方法: -额定电力输出小于10千瓦； -并网/独立运行或单机运行，单相交流输出或3相交流输出不超过1 000 V，或直流输出不超过1？500V； -燃料和氧化剂通道的最大允许工作压力小于0.1 MPa(表压)； -气体燃料(天然气、液化石油气、丙烷、丁烷、氢气等)或液体燃料(煤油、甲醇等)； -空气作为氧化剂。 本文件仅描述型式试验及其试验方法。本文件涵盖了以生产电力为主要目的的燃料电池动力系统。与上一版相比，新版本包括以下重大技术变化:测试设置的修订、测量仪器的修订、爬坡测试的引入、额定运行循环效率的引入、电磁兼容性（EMC）测试的引入、废气测试的修订、运行循环的典型持续时间的引入。

IEC 62282-3-201:2017 provides test methods for the electrical, thermal and environmental performance of small stationary fuel cell power systems that meet the following criteria:
- rated electric power output of less than 10 kW;
- grid-connected/independent operation or stand-alone operation with single-phase AC output or 3-phase AC output not exceeding 1 000 V, or DC output not exceeding 1？500 V;
- maximum allowable working pressure of less than 0,1 MPa (gauge) for the fuel and oxidant passages;
- gaseous fuel (natural gas, liquefied petroleum gas, propane, butane, hydrogen, etc.) or liquid fuel (kerosene, methanol, etc.);
- air as oxidant.
This document describes type tests and their test methods only. This document covers fuel cell power systems whose primary purpose is the production of electric power.
This new edition includes the following significant technical changes with respect to the previous edition: revision of test set-up, revision of measurement instruments, introduction of ramp-up test, introduction of rated operation cycle efficiency, introduction of electromagnetic compatibility (EMC) test, revision of exhaust gas test, introduction of typical durations of operation cycles.