1.1本规程涵盖燃气轮机燃料的接收、储存和处理，但飞机上使用的燃气轮机除外。其旨在为控制燃料中可能导致燃料系统或燃气轮机或两者恶化的物质提供指导。 1.2本规程对燃料等级的选择（本规范涵盖的主题）均未提供指导 D2880 或燃料和燃料系统的安全方面。例如，本规程未涉及储罐间距、装卸设施等，以及处理燃料易燃性和毒性的程序。 1.3以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 本规程为燃气轮机燃油的用户和燃气轮机燃料系统的设计者提供了对燃料污染物的影响以及控制燃气轮机燃料系统中此类污染物的一般方法的认识。 这种做法在本质上是一般性的，不应被视为替代燃气轮机制造商保修或联邦、州或地方政府法规施加的任何要求。 尽管它不能取代对当地条件的了解或良好工程和科学判断的使用，但该实践确实为燃气轮机用户开发单个燃料管理系统提供了指导。

1.1 This practice covers the receipt, storage, and handling of fuels for gas turbines, except for gas turbines used in aircraft. It is intended to provide guidance for the control of substances in a fuel that could cause deterioration of either the fuel system, or the gas turbine, or both. 1.2 This practice provides no guidance for either the selection of a grade of fuel, a topic covered by Specification D2880 , or for the safety aspects of the fuel and fuel systems. For example, this practice does not address the spacings of storage tanks, loading and unloading facilities, etc., and procedures for dealing with the flammability and toxic properties of the fuels. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== This practice provides the user of gas turbine fuel oils and the designer of gas turbine fuel systems with an appreciation of the effects of fuel contaminants and general methods of controlling such contaminants in gas turbine fuel systems. This practice is general in nature and should not be considered a substitute for any requirement imposed by warranty of the gas turbine manufacturer, or by federal, state, or local government regulations. Although it cannot replace a knowledge of local conditions or the use of good engineering and scientific judgment, this practice does provide guidance in development of individual fuel management systems for the gas turbine user.