现行

DID DI-MISC-81562

TEMPORARY NON-STANDARD MODIFICATION DOCUMENTATION AND MARKING REQUIREMENTS FOR TEST EQUIPMENT IN AEROSPACE VEHICLES AND RELATED GROUND SUPPORT EQUIPMENT
航空航天飞行器和相关地面支持设备中试验设备的临时非标准修改文件和标记要求

1998-05-18

现行

MIL MIL-M-27733B Amendment 1

MODIFICATION & MARKING PROCEDURES FOR TEST EQUIPMENT IN AEROSPACE VEHICLES (CLASS II MODIFICATION) (SUPERSEDING MIL-M-27733A) (S/S BY MIL-STD-27733)
修改

1985-05-03

现行

MIL MIL-M-27733B Notice 1-Cancellation

MODIFICATION & MARKING PROCEDURES FOR TEST EQUIPMENT IN AEROSPACE VEHICLES (CLASS II MODIFICATION) (SUPERSEDING MIL-M-27733A) (S/S BY MIL-STD-27733)
航空航天飞行器试验设备的修改和标记程序（II级修改）（代替MIL-M-27733A）（S/S改为MIL-STD-27733）

1998-05-18

现行

MIL MIL-M-27733B

MODIFICATION & MARKING PROCEDURES FOR TEST EQUIPMENT IN AEROSPACE VEHICLES (CLASS II MODIFICATION) (SUPERSEDING MIL-M-27733A) (S/S BY MIL-STD-27733)
航空航天飞行器试验设备的修改和标记程序（II级修改）（取代MIL-M-27733A）（由MIL-STD-27733提供）

1982-11-30

现行

BS EN 3838-2022

Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables
航空航天系列 飞机电缆用户应用标记的要求和试验

2022-06-17

现行

ASD-STAN prEN 3838

Aerospace series-Requirements and tests on user-applied markings on aircraft electrical cables
航空航天系列飞机电缆用户应用标记的要求和试验

2009-10-01

现行

SJ 20376-1993

军用电子测试设备通用规范 识别标志 包装要求
General specification for military electronic test equipment--Requirements of identification marking and package

1993-05-11

现行

CSA C22.2 NO.293.3-19/IEEE 844.3-2019

IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment - General, Testing, Marking, and Documentation Requirements
IEEE/CSA管道和设备阻抗加热标准-总则、测试、标记和文件要求

2019-02-08

现行

IEEE/CSA 844.3-2019

IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment - General, Testing, Marking, and Documentation Requirements
IEEE/CSA管道和设备阻抗加热标准-总则、测试、标记和文件要求

2019-04-28

现行

GB/T 43917.2-2024

焊接烟尘捕集和分离设备 第2部分：分离效率的测试和标记要求
Equipment for capture and separation of welding fume—Part 2: Requirements for testing and marking of separation efficiency

2024-04-25

现行

DIN EN 4863-DRAFT

Draft Document - Aerospace series - Rotorcraft immersion suits - Requirements, testing and marking; English version prEN 4863:2021
文件草案——航空航天系列——旋翼机浸没服——要求、试验和标记；英文版prEN 4863:2021

2021-12-01

现行

BS EN 250-2014

Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing and marking
呼吸设备 开路自给式压缩空气潜水装置 要求、测试和标记

2014-04-30

现行

CSA IEEE 844.1-2017/CSA C22.2 NO.293.1-17(R2022)

Skin effect trace heating of pipelines, vessels, equipment, and structures?general, testing, marking, and documentation requirements
管道、容器、设备和结构的集肤效应跟踪加热？一般要求、测试、标记和文件要求

2017-09-27

现行

UNE-EN 250-2001

RESPIRATORY EQUIPMENT. OPEN-CIRCUIT SELF-CONTAINED COMPRESSED AIR DIVING APPARATUS. REQUIREMENTS, TESTING, MARKING.
呼吸设备 开路自给式压缩空气潜水装置 要求、测试、标记

2001-01-31

现行

DIN EN 13949

Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking
呼吸设备.与压缩氮氧化物和氧气一起使用的开路自给式潜水设备.要求 试验和标记；德文版EN 13949:2003

2003-06-01

现行

BS EN 13949-2003

Respiratory equipment. Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen. Requirements, testing, marking
呼吸设备 与压缩氮氧化物和氧气一起使用的开路自给式潜水设备 要求、测试、标记

2003-03-05

现行

BS EN ISO 21904-2-2020

Health and safety in welding and allied processes. Equipment for capture and separation of welding fume-Requirements for testing and marking of separation efficiency
焊接和相关工艺的健康和安全 焊接烟尘捕集和分离设备

2020-03-18

现行

UNE-EN 13949-2003

Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking
呼吸设备.与压缩氮氧化物和氧气一起使用的开路自给式潜水设备.要求 试验和标记

2003-10-17

现行

BS 12/30262164 DC

BS EN 250. Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking
BS EN 250 呼吸设备 开路自给式压缩空气潜水装置 要求、测试、标记

2012-07-24

现行

KS B ISO 21904-2

용접 및 관련 공정에서의 안전과 보건－용접퓸 포집 및 분리장비－제2부：분리 효율의 시험 및 표식요건
焊接及相关工艺中的健康和安全焊接烟尘收集和分离设备第2部分:分离效率的测试和标记要求

2021-03-16