首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS 2782-1:METHOD 151A:1984
到馆提醒
收藏跟踪
购买正版
Methods of testing plastics. Thermal properties-Determination of cold bend temperature of flexible polyvinyl chloride extrusion compound 塑料的试验方法 热性能 软质聚氯乙烯挤出料冷弯温度的测定
发布日期: 1984-01-31
描述了一种测量柔性聚氯乙烯挤出化合物冷弯(最低)温度的程序,该温度以5°C的倍数测量,在该温度下,当缠绕在标准芯轴上时,一组三个试样中没有一个断裂或开裂。交叉引用:BS 2782:第0BS 3591部分工作健康和安全等法案1974取代了BS 2782:1970的方法104A。
Describes a procedure for measuring the cold bend (lowest) temperature of flexible polyvinyl chloride extrusion compounds measured in multiples of 5°C, at which none of a set of 3 test pieces fractures or cracks when wound on to a standard mandrel.Cross References:BS 2782:Part 0BS 3591Health and Safety at Work etc. Act 1974Replaces method 104A of BS 2782:1970.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS 2782-1-METHOD 150B-1976
Methods of testing plastics. Thermal properties-Determination of cold flex temperature of flexible polyvinyl compound
塑料的试验方法 热性能 柔性聚乙烯化合物冷弯曲温度的测定
1976-10-29
现行
BS 2782-1-METHOD 150D-1976
Methods of testing plastics. Thermal properties-Cold crack temperature of film and thin sheeting
塑料的试验方法 热性能
1976-09-30
现行
BS 2782-1-METHOD 130A-1991
Methods of testing plastics. Thermal properties-Determination of the thermal stability of polyvinyl chloride by the Congo red method
塑料的试验方法 热性能 刚果红法测定聚氯乙烯的热稳定性
1991-04-30
现行
BS 2782-1-METHODS 134A AND 134B-1992
Methods of testing plastics. Thermal properties. Determination of the oxidation induction time of thermoplastics
塑料的试验方法 热性能 热塑性塑料氧化诱导时间的测定
1992-11-15
现行
BS 2782-1-METHOD 153A-1991
Methods of testing plastics. Thermal properties-Determination of stiffness in torsion of flexible materials (general method)
塑料的试验方法 热性能 柔性材料扭转刚度的测定(通用法)
1991-10-31
现行
BS 2782-1-METHOD 153B-1991
Methods of testing plastics. Thermal properties-Determination of stiffness in torsion of flexible materials (method for vinyl chloride compounds)
塑料的试验方法 热性能 柔性材料扭转刚度的测定(氯乙烯化合物法)
1991-11-29
现行
BS 2782-1-METHOD 150C-1983
Methods of testing plastics. Thermal properties-Determination of low temperature extensibility of flexible polyvinyl chloride sheet
塑料的试验方法 热性能
1983-02-28
现行
BS 2782-10-METHOD 1003-1977
Methods of testing plastics. Glass reinforced plastics-Determination of tensile properties
塑料的试验方法 玻璃增强塑料 拉伸性能的测定
1977-08-31
现行
BS 2782-1-METHOD 131B-1983
Methods of testing plastics. Thermal properties-Determination of extensibility after heat ageing of flexible polyvinyl chloride sheet
塑料的试验方法 热性能
1983-02-28
现行
BS 2782-8-METHOD 826A-1992
Methods of testing plastics. Other properties-Determination of adhesion of print on plastics sheet
塑料的试验方法 其他财产
1992-11-15
现行
BS EN 14187-3-2017
Cold applied joint sealants. Test methods-Determination of self-levelling properties
冷涂接缝密封剂 测试方法
2017-04-30
现行
BS 2782-10-METHOD 1005-1977
Methods of testing plastics. Glass reinforced plastics-Determination of flexural properties. Three point method
塑料的试验方法 玻璃增强塑料 弯曲性能的测定 三点法
1977-08-31
现行
BS 2782-3-METHOD 365A-1976
Methods of testing plastics. Mechanical properties-Determination of softness number of flexible plastics materials
塑料的试验方法 机械性能 软塑料材料柔软度值的测定
1976-09-30
现行
BS 2782-1-METHOD 140A-1992
Methods of testing plastics. Thermal properties-Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
塑料的试验方法 热性能 与小型火焰点火源接触的水平和垂直试样燃烧特性的测定
1992-12-15
现行
BS 1902-5.11-1986
Methods of testing refractory materials. Refractory and thermal properties-Determination of thermal spalling resistance by the prism test (method 1902-511)
耐火材料的试验方法 耐火材料和热性能
1986-07-31
现行
BS 2782-1-METHOD 140E-1982
Methods of testing plastics. Thermal properties-Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method)
塑料的试验方法 热性能
1982-05-31
现行
BS 2782-4-METHOD 470B-1999
Methods of testing plastics. Chemical properties-Determination of ash of polyalkylene terephthalates
塑料的试验方法 化学性质 聚对苯二甲酸乙二醇酯灰分的测定
1999-04-15
现行
BS 7134-4.1-1990
Testing of engineering ceramics. Thermo-physical properties-Method for determination of thermal expansion
工程陶瓷的测试 热物理性质 热膨胀的测定方法
1990-05-31
现行
BS 2782-3-METHOD 360C-1991
Methods of testing plastics. Mechanical properties-Determination of tear resistance of plastics film and sheeting by the initiation method
塑料的试验方法 机械性能
1991-11-29
现行
BS 2782-3-METHOD 360A-1991
Methods of testing plastics. Mechanical properties. Determination of tear resistance of plastics film and sheeting by the Elmendorf method
塑料的试验方法 机械性能 用埃尔门多夫法测定塑料薄膜和薄板的耐撕裂性
1991-11-29