首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM C1290-16(2021)
到馆提醒
收藏跟踪
购买正版
Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts 用于外部绝缘HVAC管道的柔性纤维玻璃毡绝缘的标准规范
发布日期: 2021-09-01
1.1 本规范涵盖了用于在35°F(1.7°C)和250°F(121°C)温度范围内分配空调空气的HVAC管道外部绝缘的柔性玻璃纤维毡、管道包裹物的组成、尺寸、尺寸和物理特性。 1.2 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换,仅供参考,不被视为标准值。 1.3 当隔热材料、附件和系统的安装和使用可能造成安全和健康问题时,制造商应向用户提供与公司产品推荐使用相关的任何已知问题的适当当前信息,并应建议在安全使用时采取的保护措施。 用户应制定适当的安全和健康实践,并在使用前确定监管要求的适用性。 1.4 以下安全隐患警告仅适用于试验方法第节 13 ,在本规范中。 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1 This specification covers the composition, size, dimensions, and physical properties of flexible fiber glass blanket, ductwrap, used to externally insulate HVAC ducts used for the distribution of condition air within the temperature range of 35°F (1.7°C) and 250°F (121°C). 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 When the installation and use of thermal insulation materials, accessories, and systems may pose safety and health problems, the manufacturer shall provide the user appropriate current information regarding any known problems associated with the recommended use of the company's products, and shall also recommend protective measures to be employed in their safe utilization. The user shall establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. 1.4 The following safety hazards caveat pertains only to the test methods, Section 13 , in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: C16.23
相似标准/计划/法规