现行

DIN 2284-3

Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm in precision engineering
产品几何技术规范（GPS）-“不合格”螺纹量规件-第3部分:精密机械用公称直径超过40mm至250mm的ISO公制螺纹的“不合格”车间量规和检查塞规

2001-12-01

现行

DIN 2283-2

Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“不合格”螺纹塞规.第2部分:“不合格”车间量规.公称直径超过40mm至200mm的ISO通用公制螺纹塞规的检查和设置

2001-12-01

现行

DIN 2282-2

Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“GO”螺纹量规件.第2部分:ISO通用公制螺纹公称直径大于40mm小于200mm的“GO”车间量规、检查和设置量规件

2001-12-01

现行

DIN 2284-2

Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“不合格”螺纹量规件-第2部分:“不合格”车间量规 ISO通用米制螺纹公称直径超过40mm至200mm的检查和设置塞规

2001-12-01

现行

DIN 2282-3

Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“GO”螺纹量规件.第3部分:精密工程用公称直径超过40mm至250mm的ISO公制螺纹的“GO”车间量规和检查塞规

2001-12-01

现行

DIN 2281-2

Geometrical product specifications (GPS) - GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“GO”螺纹塞规.第2部分:“GO”车间量规.公称直径超过40mm至200mm的ISO通用公制螺纹塞规的检查和设置

2001-12-01

现行

DIN 2281-3

Geometrical product specifications (GPS) - GO workshop screw plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“GO”螺纹塞规.第3部分:精密机械用公称直径大于40mm至250mm的ISO公制螺纹的“GO”车间塞规和止回塞规

2001-12-01

现行

DIN 2283-3

Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges and check plug for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“不合格”螺纹塞规.第3部分:精密机械用公称直径大于40mm至250mm的ISO公制螺纹的“不合格”车间塞规和止回塞规

2001-12-01

现行

DIN 2280

Geometrical product specifications (GPS) - GO and NOT GO screw plug gauges for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何规格（GPS）-“通”和“不通”螺纹塞规 适用于标称直径为1 mm至40 mm的ISO通用公制螺纹

2001-12-01

现行

DIN 2283-1

Geometrical product specifications (GPS) - NOT GO workhop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何技术规范（GPS）-“不合格”螺纹塞规.第1部分:“不合格”车间量规.公称直径为1mm至40mm的ISO通用公制螺纹塞规的检查和设置

2001-12-01

现行

DIN 2247-2

Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 2: With rod gauge for holes over 40 mm up to 500 mm nominal diameter
产品几何技术规范（GPS）-“止动”塞规.第2部分:公称直径大于40mm至500mm的孔用杆规

2008-07-01

现行

DIN 2246-1

Geometrical product specifications (GPS) - "GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
产品几何技术规范（GPS）-“通”塞规.第1部分:公称直径为1mm至40mm的孔

2008-07-01

现行

DIN 2247-1

Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
产品几何技术规范（GPS）-“止动”塞规.第1部分:公称直径为1mm至40mm的孔

2008-07-01

现行

DIN 2246-3

Geometrical product specifications (GPS) - "GO" plug gauges - Part 3: For holes over 40 mm up to 120 mm nominal diameter
产品几何技术规范（GPS）-“通”塞规.第3部分:公称直径大于40mm至120mm的孔

2008-07-01

现行

DIN 2246-2

Geometrical product specifications (GPS) - "GO" plug gauges - Part 2: For holes over 120 mm up to 200 mm nominal diameter
产品几何技术规范（GPS）-“通”塞规.第2部分:公称直径超过120mm至200mm的孔

2008-07-01

现行

DIN 2247-3

Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 3: With cylindrical gauging member for holes over 40 mm up to 120 mm nominal diameter
产品几何技术规范（GPS）-“止动”塞规.第3部分:公称直径大于40mm至120mm的孔用圆柱形测量构件

2008-07-01

现行

DIN 2247-4

Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 4: With segmental cylindrical gauging member over 120 mm up to 200 mm nominal diameter
产品几何技术规范（GPS）-“不合格”塞规.第4部分:标称直径超过120mm至200mm的分段圆柱形测量构件

2008-07-01

现行

DIN 2278

Geometrical product specifications (GPS) - Gauges for ISO metric screw threads - Dirt grooves
产品几何技术规范（GPS）.ISO米制螺纹量规.污垢槽

2015-03-01

现行

DIN 2246-4

Geometrical product specifications (GPS) - "GO" plug gauges - Part 4: For holes over 40 mm up to 250 mm nominal diameter for precision mechanics
产品几何技术规范（GPS）-“通”塞规.第4部分:精密机械用公称直径大于40mm至250mm的孔

2008-07-01

现行

DIN 2247-5

Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 5: With cylindrical gauging member for holes over 40 mm up to 250 mm nominal diameter for precision mechanics
产品几何技术规范（GPS）-“止动”塞规.第5部分:精密机械用公称直径大于40mm至250mm的孔用圆柱形测量构件

2008-07-01