现行

DIN 2279

Geometrical product specifications (GPS) - Gauges for internal and external ISO metric screw threads - Overview of types, marking and application
产品几何技术规范（GPS）.ISO公制螺纹量规.内螺纹和外螺纹的量规；调查、题字、标记、应用

2001-12-01

现行

DIN EN ISO 3650

Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998)
几何产品规范（GPS）.长度标准.量块（ISO 3650-1998）；德文版EN ISO 3650:1998

1999-02-01

现行

UNE-EN ISO 3650-2000

GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS (ISO 3650:1998)
几何产品规范（GPS） 长度标准 量块（ISO 3650-1998）

2000-01-21

现行

DIN 2280

Geometrical product specifications (GPS) - GO and NOT GO screw plug gauges for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何规格（GPS）-“通”和“不通”螺纹塞规 适用于标称直径为1 mm至40 mm的ISO通用公制螺纹

2001-12-01

现行

DIN 2284-3

Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm in precision engineering
产品几何技术规范（GPS）-“不合格”螺纹量规件-第3部分:精密机械用公称直径超过40mm至250mm的ISO公制螺纹的“不合格”车间量规和检查塞规

2001-12-01

现行

DIN 2285-1

Geometrical product specifications (GPS) - GO screw ring gauges for ISO metric screw threads - Part 1: Nominal diameters from 1 mm up to 200 mm for general purposes
产品几何技术规范（GPS）ISO米制螺纹用“GO”螺纹环量规第1部分:一般用途公称直径1 mm至200 mm

2008-07-01

现行

DIN 2285-2

Geometrical product specifications (GPS) - GO screw ring gauges for ISO metric screw threads - Part 2: Nominal diameters over 50 mm up to 200 mm for precision engineering
产品几何技术规范（GPS）ISO米制螺纹用“GO”螺纹环量规第2部分:公称直径50 mm以上200 mm以下精密机械

2008-07-01

现行

DIN 2282-3

Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“GO”螺纹量规件.第3部分:精密工程用公称直径超过40mm至250mm的ISO公制螺纹的“GO”车间量规和检查塞规

2001-12-01

现行

DIN 2284-2

Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“不合格”螺纹量规件-第2部分:“不合格”车间量规 ISO通用米制螺纹公称直径超过40mm至200mm的检查和设置塞规

2001-12-01

现行

DIN 2282-2

Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“GO”螺纹量规件.第2部分:ISO通用公制螺纹公称直径大于40mm小于200mm的“GO”车间量规、检查和设置量规件

2001-12-01

现行

DIN 2283-3

Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges and check plug for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“不合格”螺纹塞规.第3部分:精密机械用公称直径大于40mm至250mm的ISO公制螺纹的“不合格”车间塞规和止回塞规

2001-12-01

现行

DIN 2283-2

Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“不合格”螺纹塞规.第2部分:“不合格”车间量规.公称直径超过40mm至200mm的ISO通用公制螺纹塞规的检查和设置

2001-12-01

现行

DIN 2281-3

Geometrical product specifications (GPS) - GO workshop screw plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“GO”螺纹塞规.第3部分:精密机械用公称直径大于40mm至250mm的ISO公制螺纹的“GO”车间塞规和止回塞规

2001-12-01

现行

DIN 2281-1

Geometrical product specifications (GPS) - GO workshop screw plug gauges, check and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何规范（GPS）-“GO”螺纹塞规.第1部分:“GO”车间量规.公称直径为1mm至40mm的ISO通用公制螺纹用塞规的检查和设置

2001-12-01

现行

DIN 2283-1

Geometrical product specifications (GPS) - NOT GO workhop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何技术规范（GPS）-“不合格”螺纹塞规.第1部分:“不合格”车间量规.公称直径为1mm至40mm的ISO通用公制螺纹塞规的检查和设置

2001-12-01

现行

DIN 2281-2

Geometrical product specifications (GPS) - GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“GO”螺纹塞规.第2部分:“GO”车间量规.公称直径超过40mm至200mm的ISO通用公制螺纹塞规的检查和设置

2001-12-01

现行

DIN 2240-2

Geometrical product specification (GPS) - Gauge handles for gauging members over 40 mm nominal diameter: Handles, fixing screws and locking prongs
产品几何技术规范（GPS）.手柄.第2部分:公称直径超过40mm的测量构件用手柄；手柄、固定螺钉和夹具

2001-12-01

现行

DIN EN ISO 13225

Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
几何产品规范（GPS）-尺寸测量设备；高度计.设计和计量特性（ISO 13225-2012）；德文版EN ISO 13225:2012

2012-08-01

现行

BS 96/704406 DC

Geometrical product specification (GPS). Dimensional measuring instruments. Dial Gauges. Design and metrological requirements (ISO/DIS 463)
几何产品规范（GPS） 尺寸测量仪器 千分表 设计和计量要求（ISO/DIS 463）

1996-03-18

现行

DIN EN ISO 463

Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
几何产品规范（GPS）.尺寸测量设备.机械千分表的设计和计量特性（ISO 463-2006）

2006-06-01