1.1本规程旨在作为确定新施工、重大改造或日常维护合同期间海洋表面处理和涂层应用的具体检查要求的指南。 1.2本规程旨在协调船东、造船商、涂料制造商和涂料涂敷商之间的检查活动，并在开始表面处理或涂料涂敷或两者之前制定具体要求。 1.3本规程不提供记录所需数据的方法（例如，薄膜厚度、温度、相对湿度等），而是建立了一种格式，用于确定在制备/涂层过程中必须记录哪些数据，以及由谁记录。 1.4本规程未建立表面处理或涂层检查的验收/拒收标准，也未涉及修复发现缺陷的方法。然而，它确实提供了一种确定它们的方法。 1.5本标准可能涉及危险材料、操作和设备。本标准并非旨在解决与其使用相关的所有安全问题。使用本标准的人有责任在使用前咨询并建立适当的安全和健康实践，并确定监管限制的适用性。

1.1 This practice is intended to serve as a guide for determining specific inspection requirements for marine surface preparation and coating application during new construction, major retrofit, or routine maintenance contracts. 1.2 It is intended that this practice be utilized to coordinate inspection activities between ship owner, ship builder, coatings manufacturer and coatings applicator, and that specific requirements be developed prior to the commencement of surface preparation or coating application, or both. 1.3 This practice does not provide a means of recording required data (for example, film thicknesses, temperatures, relative humidity, etc.), but instead establishes a format for deciding what data must be recorded, when during the preparation/coating process, and by whom. 1.4 This practice does not establish accept/reject criteria for surface preparation or coating inspection, nor does it address methods of repairing deficiencies found. It does, however, provide a means of determining them. 1.5 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.