首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
历史 ASTM F1999-00
到馆提醒
收藏跟踪
购买正版
Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems 硬质聚氯乙烯(PVC)栅栏系统安装的标准实施规程
发布日期: 2000-01-10
1.1本规程涵盖了在最大霜渗透不超过30英寸的区域内刚性聚氯乙烯(PVC)围栏系统和围栏附件的最低要求和安装方法。(76厘米)。在所有情况下,也请参阅特定制造商的安装说明。 1.2本规程旨在指导负责或涉及刚性(PVC)围栏系统安装的人员。 1.3本规程不排除任何经证明在任何天气、土壤或霜冻条件下具有同等或更好性能的试验方法。 1.4在选择围栏类型、间距、高度和安装方法时,应考虑最终用途和适用的规范要求。 1.4.1牲畜围场围栏可能需要比周边围栏更耐用。 1.4.2住宅围栏类型不得设计用于阳台或护栏。 1.5以英寸-磅为单位的数值应视为标准值。括号中给出的值仅供参考。 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。
1.1 This practice covers the minimum requirement for and methods of installation for rigid poly(vinyl chloride) (PVC) fencing systems and fence accessories in areas where the maximum frost penetration does not exceed 30 in. (76 cm). In all cases, refer also to the specific manufacturer's instructions for installation. 1.2 This practice is intended to guide those responsible for or concerned with installation of rigid (PVC) fence systems. 1.3 This practice does not preclude any test method that is proven to give equal or better performance under any weather, soil, or frost conditions. 1.4 End-use and applicable code requirements shall be considered in the choice of fence style, spacing, height, and installation method. 1.4.1 Paddock fencing for livestock may need to be more durable than perimeter fence. 1.4.2 Residential fence styles may not be designed for balcony or guardrail use. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
分类信息
关联关系
研制信息
归口单位: F14.30
相似标准/计划/法规
现行
ASTM F1999-14(2024)
Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems
硬质聚氯乙烯(PVC)围栏系统安装的标准规程
2024-09-01
现行
ASTM D3679-24
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
硬质聚氯乙烯(PVC)壁板的标准规范
2024-04-01
现行
ASTM D4216-22
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
硬质聚氯乙烯(PVC)及相关PVC和氯化聚氯乙烯(CPVC)建筑产品化合物的标准规范
2022-05-01
现行
ASTM D4477-24
Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
硬质(未增塑)聚氯乙烯(PVC)拱腹的标准规范
2024-04-01
现行
ASTM D3678-19
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
硬质聚氯乙烯(PVC)内型材挤压件的标准规范
2019-11-01
现行
ASTM F1947-21a
Standard Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
在现有下水道和导管中安装折叠聚氯乙烯(PVC)管的标准实施规程
2021-08-01
现行
ASTM D1784-20
Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
硬质聚氯乙烯(PVC)化合物和氯化聚氯乙烯(CPVC)化合物的标准分类系统和基本规范
2020-01-15
现行
ASTM D6263-23
Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
硬质聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)制成的挤压棒材和棒材的标准规范
2023-02-01
现行
ASTM D4396-22
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
非压力应用塑料管和配件用硬质聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)化合物
2022-09-01
现行
ASTM D7445-24
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
带泡沫塑料衬垫的硬质聚氯乙烯(PVC)衬垫(背衬乙烯基衬垫)标准规范
2024-05-01
现行
ASTM D4226-19e1
Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
硬质聚氯乙烯(PVC)建筑产品抗冲击性的标准试验方法
2019-11-01
现行
ASTM D8427-21
Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sheet Piling
板桩用硬质聚氯乙烯(PVC)外部型材的标准规范
2021-12-01
现行
ASTM F3459-21
Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sound Walls
隔音墙用硬质聚氯乙烯(PVC)外部型材的标准规范
2021-01-01
现行
ASTM F964-13(2024)
Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
围栏和栏杆用硬质聚氯乙烯(PVC)外型材标准规范
2024-09-01
现行
ASTM D7083-16(2022)
Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
用气相色谱法测定聚氯乙烯中单体增塑剂的标准实施规程
2022-07-01
现行
ASTM D2538-18
Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
用转矩流变仪熔融聚氯乙烯(PVC)化合物的标准实施规程
2018-11-01
现行
ASTM F1867-22
Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
现有下水道和导管修复用A型折叠/成型聚氯乙烯(PVC)管的安装标准实施规程
2022-11-15
现行
ASTM D5991-23
Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
聚对苯二甲酸乙二醇酯(PET)薄片中聚氯乙烯(PVC)污染的分离和鉴定的标准实施规程
2023-02-01
现行
ASTM F512-19(2024)
Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
地下安装用光滑壁聚氯乙烯(PVC)导管和配件的标准规范
2024-01-15
现行
ASTM D3596-19
Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
通用聚氯乙烯(PVC)树脂中凝胶(鱼眼)的测定
2019-04-01