本文件旨在为浮式海洋能量转换器（MEC）系泊系统的设计和评估提供统一的方法（定义见TC 114范围）。它旨在应用于从系泊系统评估到浮式海洋能量转换器装置的设计、安装和维护的各个阶段。本文件适用于任何开放水域条件下任何尺寸或类型的浮式海洋能量转换器装置的系泊系统。系泊系统设计过程的某些方面在现有和油井中更为详细- 建立系泊标准。本文件旨在强调船用能源转换器的不同要求，而不是重复现有标准或流程。 虽然说明了锚的承载能力要求，但详细的岩土工程分析和锚的设计超出了本文件的范围。交叉引用:IEC TS 62600-1ISO 17776:2000ISO 19901-1:2005ISO 19901-7:2013API RP 2SKAPI RP 2ISO 1704:2008ISO 2232:1990ISO 9089:1989ISO 10425:2003ISO 13628-5:2009ISO 14688-1:2002ISO 19900: 2013ISO 19903:2006API RP 2 METAPI RP 2API RP 2API Spec 2API RP 2购买时可获得的当前小修改包括在本文件的购买中。

The purpose of this document is to provide uniform methodologies for the design and assessment of mooring systems for floating Marine Energy Converters (MECs) (as defined in the TC 114 scope). It is intended to be applied at various stages, from mooring system assessment to design, installation and maintenance of floating Marine Energy Converters plants.This document is applicable to mooring systems for floating Marine Energy Converters units of any size or type in any open water conditions. Some aspects of the mooring system design process are more detailed in existing and well-established mooring standards. The intent of this document is to highlight the different requirements of Marine Energy Converters and not duplicate existing standards or processes. While requirements for anchor holding capacity are indicated, detailed geotechnical analysis and design of anchors are beyond the scope of this document.Cross References:IEC TS 62600-1ISO 17776:2000ISO 19901-1:2005ISO 19901-7:2013API RP 2SKAPI RP 2IISO 1704:2008ISO 2232:1990ISO 9089:1989ISO 10425:2003ISO 13628-5:2009ISO 14688-1:2002ISO 19900:2013ISO 19903:2006API RP 2METAPI RP 2AAPI RP 2AAPI Spec 2FAPI RP 2SMAll current amendments available at time of purchase are included with the purchase of this document.