IEC TS 62600-2:20 19提供了确保波浪、海洋、潮汐和河流水流能量转换器（统称为海洋能量转换器）工程完整性的设计要求。其目的是提供适当水平的保护，防止所有可能导致MEC结构、机械、电气或控制系统灾难性故障的危害。 本文件提供了MEC主结构、附件、海底接口、机械系统和电气系统的要求，因为它们与设备在特定地点环境条件下的可行性有关。本文件适用于漂浮或固定在海底或海岸上且在运行期间无人驾驶的MECs。 除环境条件外，本文件还涉及设计条件（正常运行、故障运行、停车等）。);设计类别（正常、极端、异常和运输）；以及使用极限状态设计方法的极限状态（适用性、极限状态、疲劳状态和意外状态）。这第二版取消并取代了2016年出版的第一版。 与上一版相比，此版本包括以下重大技术变更: a)第二版规定了海洋能源转换器特有的设计条件。

IEC TS 62600-2:2019 provides design requirements to ensure the engineering integrity of wave, ocean, tidal and river current energy converters, collectively referred to as marine energy converters. Its purpose is to provide an appropriate level of protection against damage from all hazards that may lead to catastrophic failure of the MEC structural, mechanical, electrical or control systems.
This document provides requirements for MEC main structure, appendages, seabed interface, mechanical systems and electrical systems as they pertain to the viability of the device under site-specific environmental conditions. This document applies to MECs that are either floating or fixed to the seafloor or shore and are unmanned during operational periods.
In addition to environmental conditions, this document addresses design conditions (normal operation, operation with fault, parked, etc.); design categories (normal, extreme, abnormal and transport); and limit states (serviceability, ultimate, fatigue and accidental) using a limit state design methodology. This second edition cancels and replaces the first edition published in 2016.
This edition includes the following significant technical changes with respect to the previous edition:
a) The second edition sets forth design conditions unique to marine energy converters.