ISO 7250-1:2017提供了人体测量的描述，可用作比较人口群体和建立人体测量数据库的基础（见ISO 15535）。本文档中规定的测量基本目录旨在作为人体工程学家的指南，人体工程学家需要定义人口群体并将其知识应用于人们工作和生活的地方的几何设计。另外，该列表也是从三维扫描（ISO 20685中规定）中提取一维和二维测量的基础。它作为如何进行人体测量的指南，还向人体工程学和设计人员提供了在设计任务解决方案中应用的解剖和人体测量基础和测量原理的信息。 ISO 7250-1:2017旨在与国家或国际法规或协议一起使用，以确保人口群体中的和谐统一，并允许成员机构之间的人体测量数据进行比较。在各种应用中，预计基本列表将由具体的附加测量值进行补充。附件A显示了这里描述的尺寸与其用途的对应关系ISO 14738和ISO 15534。

ISO 7250-1:2017 provides a description of anthropometric measurements which can be used as a basis for comparison of population groups and for the creation of anthropometric databases (see ISO 15535). The basic list of measurements specified in this document is intended to serve as a guide for ergonomists who are required to define population groups and apply their knowledge to the geometric design of the places where people work and live. In addition, the list serves as a basis for extracting one- and two-dimensional measurements from three-dimensional scans (specified in ISO 20685). It serves as a guide on how to take anthropometric measurements, but also gives information to the ergonomist and designer on the anatomical and anthropometrical bases and principles of measurement which are applied in the solution of design tasks. ISO 7250-1:2017 is intended to be used in conjunction with national or international regulations or agreements to ensure harmony in defining population groups and to allow comparison of anthropometric data among member bodies. In its various applications, it is anticipated that the basic list will be supplemented by specific additional measurements. Annex A shows the correspondence of dimensions described here with their use in ISO 14738 and ISO 15534.