IEC 62610-4:2013-电子设备机械结构 - 符合Iec 60297和Iec 60917系列的机柜散热管理 - 第4部分:电子柜供水换热器的冷却性能测试-国家数字标准馆

现行 IEC 62610-4:2013

到馆阅读

收藏跟踪

购买正版

Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets 电子设备机械结构 - 符合Iec 60297和Iec 60917系列的机柜散热管理 - 第4部分:电子柜供水换热器的冷却性能测试

发布日期： 2013-08-15

                IEC 62610-4:2013规定了单电子柜配置内供水热交换器的测试设置和测试参数。测试的重点是安装高功耗电子设备的机柜。相关机柜来自IEC 60297（19英寸）和IEC 60917（25毫米）系列。本标准旨在根据规定的试验设置和冷却参数，为机柜的冷却性能提供可比数据。
关键词:电子柜、冷却、供水换热器

IEC 62610-4:2013 specifies the test setup and test parameters for water supplied heat exchangers within single electronic cabinet configurations. The tests are focused on cabinets for the installation of high power dissipation electronic equipment. The cabinets concerned are from the IEC 60297 (19 in) and IEC 60917 (25 mm) series. The purpose of this standard is to provide comparable data for the cooling performance of cabinets according to defined test setups and cooling parameters.
Key words: Electronic cabinets, cooling, water supplied heat exchangers

分类信息

发布单位或类别：国际组织-国际电工委员会

ICS分类： 31.240电子学 - 电子设备用机械构件

关联关系

研制信息

归口单位： TC 48/SC 48D

相似标准/计划/法规

GB/T 31845-2015

电工电子设备机械结构热设计规范
Mechanical structures for electrotechnical and electronic equipment—Thermal design specification

BS EN IEC 62610-2-2018

Mechanical structures for electrical and electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series-Method for the determination of forced air cooling structure
电气和电子设备的机械结构符合IEC 60297和IEC 60917系列的机柜热管理

BS DD IEC/TS 62610-2-2011

Mechanical structures for electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series-Design guide. Method for the determination of forced air-cooling structure
电子设备的机械结构按照IEC 60297和IEC 60917系列对机柜进行热管理设计指南强制风冷结构的测定方法

BS 10/30234513 DC

BS EN 62610-4. Mechanical structures for electronic equipment. Thermal management. Part 4. Cooling performance tests for water supplied heat exchangers in electronic cabinets
英国标准EN 62610-4 电子设备的机械结构热管理第四部分电子柜中供水换热器的冷却性能试验

IEC 62610-2-2018

Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling structure
电气和电子设备的机械结构.符合IEC 60297和IEC 60917系列的机柜热管理.第2部分:强制风冷结构的测定方法

BS EN 62610-5-2016

Mechanical structures for electrical and electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series-Cooling performance evaluation for indoor cabinets
电气和电子设备的机械结构符合IEC 60297和IEC 60917系列的机柜热管理

BS EN IEC 62610-6-2020

Mechanical structures for electrical and electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series-Air recirculation and bypass of indoor cabinets
电气和电子设备的机械结构符合IEC 60297和IEC 60917系列的机柜热管理

GB/T 40815.5-2022

电气和电子设备机械结构　符合英制系列和公制系列机柜的热管理　第5部分：户内机柜的冷却性能评估
Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 5: Cooling performance evaluation for indoor cabinets

GB/T 40815.2-2021

电气和电子设备机械结构　符合英制系列和公制系列机柜的热管理　第2部分：强迫风冷的确定方法
Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 2: Method for the determination of forced air cooling

BS EN 62610-4-2013

Mechanical structures for electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series-Cooling performance tests for water supplied heat exchangers in electronic cabinets
电子设备的机械结构符合IEC 60297和IEC 60917系列的机柜热管理

GB/T 40815.4-2021

电气和电子设备机械结构　符合英制系列和公制系列机柜的热管理　第4部分：电子机柜中供水热交换器的冷却性能试验
Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets

DIN IEC 62610-4-DRAFT

Draft Document - Mechanical structures for electronic equipment-Thermal management - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets (IEC 48D/453/CD:2010)
文件草稿.电子设备热管理用机械结构.第4部分:电子柜中供水热交换器的冷却性能试验（IEC 48D/453/CD:2010）

IEC 62610-5-2016

Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 5: Cooling performance evaluation for indoor cabinets
电气和电子设备的机械结构 - 符合Iec 60297和Iec 60917系列的机柜热管理 - 第5部分:室内机柜的冷却性能评估

IEC 62610-6-2020

Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 6: Air recirculation and bypass of indoor cabinets
电气和电子设备的机械结构.符合IEC 60297和IEC 60917系列的机柜热管理.第6部分:室内机柜的空气再循环和旁路

BS DD IEC/TS 62610-3-2009

Mechanical structures for electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series-Design guide. Evaluation method for thermoelectrical cooling systems (Peltier effect)
电子设备的机械结构按照IEC 60297和IEC 60917系列对机柜进行热管理设计指南热电冷却系统的评估方法（珀耳帖效应）

BS DD IEC/TS 62610-1-2009

Mechanical structures for electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series-Design guide. Interface dimension and provision for thermoelectrical cooling systems (Peltier effect)
电子设备的机械结构按照IEC 60297和IEC 60917系列对机柜进行热管理设计指南热电冷却系统的接口尺寸和规定（珀耳帖效应）

IEC TS 62610-3-2009

Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 3: Design guide: Evaluation method for thermoelectrical cooling systems (Peltier effect)
电子设备的机械结构.符合IEC 60297和IEC 60917系列的机柜热管理.第3部分:设计指南:热电冷却系统的评估方法（珀耳帖效应）

IEC TS 62610-1-2009

Mechanical structures for electronic equipment - Thermal management for cabinets in accordance wit IEC 60297 and IEC 60917 series - Part 1: Design guide: Interface dimension and provision for thermoelectrical cooling systems (Peltier effect)
电子设备的机械结构.符合IEC 60297和IEC 60917系列的机柜热管理.第1部分:设计指南:热电冷却系统的接口尺寸和规定（珀耳帖效应）

Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets (IEC 62610-4:2013); German version EN 62610-4:2013
电子设备的机械结构.符合IEC 60297和IEC 60917系列的机柜热管理.第4部分:电子机柜中供水热交换器的冷却性能试验（IEC 62610-4-2013）；德文版EN 62610-4:2013

Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 5: Cooling performance evaluation for indoor cabinets (IEC 62610-5:2016); German version EN 62610-5:2016
电气和电子设备的机械结构.符合IEC 60297和IEC 60917系列的机柜热管理.第5部分:室内机柜的冷却性能评估（IEC 62610-5-2016）；德文版EN 62610-5:2016

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统