首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS 2782-7:METHOD 721A:1988
到馆提醒
收藏跟踪
购买正版
Methods of testing plastics. Rheological properties-Determination of resin flow from resin impregnated glass fabric 塑料的试验方法 流变特性
发布日期: 1988-07-29
测量在加热压板之间挤压时,从浸渍织物的堆叠层渗出的树脂的质量百分比。结合BS 2782-0交叉参考:BS 1755:第1BS 2782部分:第0BS 4584部分:第11部分《1974年工作健康和安全法案》
Measures the percentage mass of resin exuded from stacked layers of impregnated fabric when pressed between heated platens. To be read in conjunction with BS 2782-0Cross References:BS 1755:Part 1BS 2782:Part 0BS 4584:Part 11Health and Safety at Work etc. Act 1974
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS 2782-7-METHOD 732F-1991
Methods of testing plastics. Rheological properties-Determination of viscosity number of methyl methacrylate polymers
塑料的试验方法 流变特性 甲基丙烯酸甲酯聚合物粘数的测定
1991-06-28
现行
BS 2782-7-METHOD 720B-1979
Methods of testing plastics. Rheological properties-Cup flow of phenolic and alkyd moulding materials
塑料的试验方法 流变特性
1979-08-31
现行
BS 2782-7-METHOD 740C-1996
Methods of testing plastics. Rheological properties-Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
塑料的试验方法 流变特性 聚合物分散体 白点温度和最低成膜温度的测定
1996-07-15
现行
BS 4317-21-1999
Methods of test for cereals and pulses-Determination of rheological properties of doughs using an extensograph
谷物和豆类的试验方法
1999-12-15
现行
BS 2782-7-METHOD 740B-1996
Methods of testing plastics. Rheological properties-Polymer dispersions and synthetic rubber latices. Freeze-thaw cycle stability test
塑料的试验方法 流变特性 聚合物分散体和合成橡胶乳液 冻融循环稳定性试验
1996-07-15
现行
ASTM D7175-23
Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
用动态剪切流变仪测定沥青结合料流变特性的标准试验方法
2023-12-15
现行
BS 4317-22-1989
Methods of test for cereals and pulses-Determination of water absorption of flour and rheological properties of doughs using a valorigraph
谷物和豆类的试验方法 用valorigraph测定面粉吸水率和面团流变学特性
1989-09-29
现行
BS 4317-20-1999
Methods of test for cereals and pulses-Determination of water absorption of flour and rheological properties of doughs using a farinograph
谷物和豆类的试验方法
1999-12-15
现行
BS EN ISO 3672-2-2001
Plastics. Unsaturated-polyester resins (UP-R)-Preparation of test specimens and determination of properties
塑料 不饱和聚酯树脂(UP-R)
2002-05-14
现行
DIN 51810-3
Testing of lubricants - Testing of rheological properties of lubricating greases - Part 3: Determination of flow point with inclining rod method
润滑剂试验润滑脂流变性能试验第3部分:用斜杆法测定流动点
2016-08-01
现行
BS 2782-10-METHOD 1003-1977
Methods of testing plastics. Glass reinforced plastics-Determination of tensile properties
塑料的试验方法 玻璃增强塑料 拉伸性能的测定
1977-08-31
现行
BS 2782-8-METHOD 826A-1992
Methods of testing plastics. Other properties-Determination of adhesion of print on plastics sheet
塑料的试验方法 其他财产
1992-11-15
现行
BS 2782-10-METHOD 1005-1977
Methods of testing plastics. Glass reinforced plastics-Determination of flexural properties. Three point method
塑料的试验方法 玻璃增强塑料 弯曲性能的测定 三点法
1977-08-31
现行
KS M ISO 3672-2(2017 Confirm)
플라스틱 불포화 폴리에스테르 수지(UP-R) - 제2부 : 시험편 제작 및 물성 측정
塑料不饱和聚酯树脂第2部分:试样制备和性能测定
2007-09-20
现行
KS M ISO 3672-2
플라스틱 — 불포화 폴리에스테르 수지(UP-R) — 제2부: 시험편 제작 및 물성 측정
塑料.不饱和聚酯树脂(UP-R).第2部分:试样制备和性能测定
2022-12-19
现行
GB/T 24148.2-2009
塑料 不饱和聚酯树脂(UP-R) 第2部分:试样制备和性能测定
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties
2009-06-15
现行
ISO 3672-2-2000
Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
塑料制品;不饱和聚酯树脂(UP-R)第2部分:试样制备和性能测定
2000-08-10
现行
BS 2782-3-METHOD 365A-1976
Methods of testing plastics. Mechanical properties-Determination of softness number of flexible plastics materials
塑料的试验方法 机械性能 软塑料材料柔软度值的测定
1976-09-30
现行
BS 2782-4-METHOD 470B-1999
Methods of testing plastics. Chemical properties-Determination of ash of polyalkylene terephthalates
塑料的试验方法 化学性质 聚对苯二甲酸乙二醇酯灰分的测定
1999-04-15
现行
BS 2782-3-METHOD 360C-1991
Methods of testing plastics. Mechanical properties-Determination of tear resistance of plastics film and sheeting by the initiation method
塑料的试验方法 机械性能
1991-11-29