现行

DIN 13-6

General purpose ISO metric screw threads - Nominal sizes for 1.5 mm fine pitch threads with diameters from 12 mm to 300 mm
ISO通用米制螺纹.第6部分:1.5mm细牙螺纹的标称尺寸；标称直径从12毫米到300毫米

1999-11-01

现行

DIN 13-3

General purpose ISO metric screw threads - Nominal sizes for 0.5 mm fine pitch threads with diameters from 3.5 mm to 90 mm
ISO通用米制螺纹.第3部分:0.5mm细牙螺纹的标称尺寸；标称直径从3.5毫米到90毫米

1999-11-01

现行

DIN 13-7

General purpose ISO metric screw threads - Nominal sizes for 2 mm fine pitch threads with diameters from 17 mm to 300 mm
ISO通用米制螺纹.第7部分:2mm细牙螺纹的标称尺寸；标称直径从17毫米到300毫米

1999-11-01

现行

DIN 13-4

General purpose ISO metric screw threads - Nominal sizes for 0.75 mm fine pitch threads with diameters from 5 mm to 110 mm
ISO通用米制螺纹.第4部分:0.75mm细牙螺纹的标称尺寸；标称直径从5毫米到110毫米

1999-11-01

现行

DIN 13-10

General purpose ISO metric screw threads - Nominal sizes for 6 mm fine pitch threads with diameters from 70 mm to 500 mm
ISO通用米制螺纹.第10部分:6mm细牙螺纹的标称尺寸；标称直径从70毫米到500毫米

1999-11-01

现行

DIN 13-5

General purpose ISO metric screw threads - Nominal sizes for 1 mm and 1.25 mm fine pitch threads with diameters from 7.5 mm to 200 mm
ISO通用米制螺纹.第5部分:1 mm和1.25 mm细牙螺纹的标称尺寸；标称直径从7.5毫米到200毫米

1999-11-01

现行

DIN 13-1

General purpose ISO metric screw threads - Nominal sizes for 1 mm to 68 mm diameter coarse pitch threads
ISO通用米制螺纹.第1部分:粗牙螺纹的标称尺寸；公称直径从1毫米到68毫米

1999-11-01

现行

DIN 13-2

General purpose ISO metric screw threads - Nominal sizes for 0.2 mm, 0.25 mm and 0.35 mm fine pitch threads with diameters from 1 mm to 50 mm
ISO通用米制螺纹-第2部分:0.2mm、0.25mm和0.35mm细牙螺纹的标称尺寸；公称直径从1毫米到50毫米

1999-11-01

现行

DIN 13-11

General purpose ISO metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads with diameters from 130 mm to 1 000 mm
ISO通用米制螺纹.第11部分:8mm细牙螺纹的标称尺寸；标称直径从130毫米到1000毫米

1999-11-01

现行

DIN 13-22

ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm
ISO通用米制螺纹.第22部分:具有优选公差等级的细牙螺纹的尺寸限制；标称直径从25毫米到52毫米

2005-08-01

现行

DIN 13-26

ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
ISO通用米制螺纹.第26部分:具有优选公差等级的细牙螺纹的尺寸限制；标称直径从252毫米到1000毫米

2005-08-01

现行

DIN 13-21

ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 1 mm to 24.5 mm
ISO通用米制螺纹.第21部分:具有优选公差等级的细牙螺纹的尺寸限制；标称直径从1毫米到24.5毫米

2005-08-01

现行

DIN 13-23

ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm
ISO通用米制螺纹.第23部分:具有优选公差等级的细牙螺纹的尺寸限制；标称直径从53毫米到110毫米

2005-08-01

现行

DIN 13-25

ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm
ISO通用米制螺纹.第25部分:具有优选公差等级的细牙螺纹的尺寸限制；公称直径182毫米至250毫米

2005-08-01

现行

DIN 13-24

ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 112 mm to 180 mm
ISO通用米制螺纹.第24部分:具有优选公差等级的细牙螺纹的尺寸限制；公称直径从112毫米到180毫米

2005-08-01

现行

DIN 2299-1

NOT GO screw ring gauges for general purpose ISO metric screw threads with nominal diameter from 1 mm to 200 mm
产品几何技术规范（GPS）.ISO米制螺纹用止动螺纹环规.第1部分:公称直径1 mm至200 mm；一般用途

2003-04-01

现行

JIS B 0205-3-2001

ISO general purpose metric screw threads -- Part 3: Selected sizes for screws, bolts and nuts
ISO通用公制螺纹第3部分:螺钉、螺栓和螺母的选择尺寸

2001-01-01

现行

DIN 8141-1

ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Nominal sizes, tolerances and limits of size
ISO公制螺纹；铝铸造合金过盈配合用粗螺距螺纹和细螺距螺纹；标称直径为5mm至16mm；标称尺寸、公差和尺寸限值

1993-07-01

现行

DIN 13-9

General purpose ISO metric screw threads - Limits of size for 1 mm to 68 mm diameter coarse pitch threads with recommended tolerance classes
ISO通用米制螺纹.第9部分:4mm细牙螺纹的标称尺寸；标称直径从40毫米到300毫米

1999-11-01

现行

DIN 13-20

General purpose ISO metric screw threads - Part 20: Limits of size for 1 mm to 68 mm diameter coarse pitch threads with recommended tolerance classes
ISO通用米制螺纹-第20部分:具有优选公差等级的粗牙螺纹的尺寸限制；标称尺寸从1毫米到68毫米

2000-08-01