BS EN 14314:2015规定了工厂制酚醛泡沫产品的要求 用于建筑设备和工业装置的隔热，具有操作性 温度范围约为-200°C至+120°C。在-50°C的工作温度以下，对产品在环境中的适用性进行特殊测试 建议使用预期用途（例如氧气液化）。应注意制造商的建议 在所有情况下。产品以块体、表面或非表面、板、管段和管段的形式制造 以及预制器皿。本欧洲标准描述了产品特性，包括测试程序， 合格性、标记和评价。本标准涵盖的产品也用于预制隔热系统和 复合板；不包括包含这些产品的系统的性能。本欧洲标准未规定应达到的给定财产的要求水平 通过一种产品来证明其在特定应用中的适用性。测试所需的水平 给定的应用可以在法规和招标书中找到。在10°C下，宣称导热系数大于0050 W/（m·K）的产品不包括在 这个标准。本欧洲标准不包括现场保温（吹扫或浇注）产品或其他产品 用于建筑结构的隔热。本欧洲标准不包括以下声学方面:直接空气传播声音 绝缘和冲击噪声传递指数。交叉引用:EN 822EN 823EN 824EN 825EN 826EN 1604EN 1606EN 1608EN 1609EN 12085EN 12086EN 12429EN 12667: 2001EN 12939EN 13166EN 13172:2012EN 13467EN 13468EN 13501-1:2007+A1:2009EN 13823EN 14706EN 14707EN 15715:2009EN ISO 4590EN ISO 8497EN ISO 9229EN ISO 10456EN ISO 11925-2EN ISO 13787ISO 8497ISO 9229ISO 10456ISO 11925-2ISO 13787ASTM D 3985EN 1602EN 12089EN 12090EN 13238EN 13469EN 13470EN 13471EN 14509ISO 65购买时可提供的所有当前修订版均包含在购买时这份文件。

BS EN 14314:2015 specifies the requirements for factory made phenolic foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 200 °C to + 120 °C.Below an operating temperature of - 50 °C, special tests regarding the suitability of the products in the intended application are advised (e.g. liquefaction of oxygen). Manufacturer's advice should be heeded in all cases.The products are manufactured in the form of blocks, faced or unfaced, boards, pipe sections, segments and prefabricated ware.This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered.This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.Products with a declared thermal conductivity greater than 0,050 W/(m·K) at 10 °C are not covered by this standard.This European Standard does not cover products for in situ-insulation (blowing or pouring) or products for the insulation of the building structure.This European Standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index.Cross References:EN 822EN 823EN 824EN 825EN 826EN 1604EN 1606EN 1608EN 1609EN 12085EN 12086EN 12429EN 12667:2001EN 12939EN 13166EN 13172:2012EN 13467EN 13468EN 13501-1:2007+A1:2009EN 13823EN 14706EN 14707EN 15715:2009EN ISO 4590EN ISO 8497EN ISO 9229EN ISO 10456EN ISO 11925-2EN ISO 13787ISO 8497ISO 9229ISO 10456ISO 11925-2ISO 13787ASTM D 3985EN 1602EN 1607EN 12089EN 12090EN 13238EN 13469EN 13470EN 13471EN 14509ISO 65All current amendments available at time of purchase are included with the purchase of this document.